NS-211Micro-USB Introduction Thank you for purchasing this NEWSTAR Built-In Cabling 2-Port KVM Switch (NS-211Micro-USB). NEWSTAR’s 2-Port KVM Switch delivers durable and high quality product at a competitive price. With the NEWSTAR Built-In Cabling 2-Port KVM Switch, you can access multiple computers from a single console (keyboard, mouse, and monitor ).
LEDs light to indicate which corresponding port is currently active. Cable Management The NEWSTAR 2-Port KVM Switch with the 2-in-1 built-in cables (USB, VGA) provide advanced cable management. Once the cables have been installed, the switch will provide a no-hassle, precise, and neat working area.
NS-211Micro-USB Specifications Operation and Storage parameters Operating Temperature: 0~40 C (32~104 F) Storage Temperature: -20~60 C (-4~140 F) Humidity: 0~80% HRH non condensing PC port connections Keyboard / Mouse: USB A Type Male Monitor: HDDB 15 pin Male Console connections...
NS-211Micro-USB. Before you begin, please turn off all the computers that you are going to connect to the NS-211Micro-USB. Plugging and unplugging cables while computers are powered on might cause irreversible damage to your computers, data, and/or your switch, NEWSTAR will not be responsible for such damages.
NS-211Micro-USB Hardware Installation 3.Connect the USB keyboard and mouse directly into the USB keyboard and mouse ports on the front panel of your switch. Connecting the Computers 1.Connect the VGA cable that is built into the KVM Switch to the VGA port on the first computer.
Page 9
NS-211Micro-USB Hardware Installation 2.Connect the USB cable that is built into the KVM Switch to the USB port on the first computer. ��� ���������� ��� 3. Repeat steps 1 through to 2 for the other computer. 4.Power on your computers, now your new KVM Switch...
NS-211Micro-USB Hot-Key Commands Operation Controlling your computers with the NS-211Mirco-USB is fast and easy. The NS-211Mirco-USB allows you to access the computers by using simple Hot Key commands from the keyboard (PC only) or from the push button (PC and Mac).
NS-211Micro-USB FCC Certifications This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Hardware is used and serviced in accordance with applicable documentation; provided that a completed Registration Card is returned to an Authorized NEWSTAR Service Office within ninety (90) days after the date of original retail purchase of the Hardware. If a completed Registration Card is not received by an authorized NEWSTAR Service Office within such ninety (90) period, then the Warranty Period shall be ninety (90) days from the date of purchase.
NS-211Micro-USB Hardware. All Hardware (or part thereof) that is replaced by NEWSTAR, or for which the you specific legal rights, and you may also have other rights that vary from state to state. Governing Law: This Limited Warranty shall be governed by the Haarlem, city of The Netherlands.
Need help?
Do you have a question about the NS-211Micro-USB and is the answer not in the manual?
Questions and answers