Automatic Temperature Control (Atc) System With Heated Seats; Temperature Conversion - Ford Fusion 2009 Owner's Manual

Automatic Temperature Control (ATC) system with heated seats

(if equipped)
Temperature conversion: To switch between Fahrenheit and Celsius:
If your vehicle is equipped with a full message center, refer to Setup
menu in the Message center section of the Driver Controls chapter.
If your vehicle is equipped with a mini message center, see your
authorized dealer for temperature conversion.
MAX A/C setting: In order to achieve maximum cooling performance,
press , A/C, , and set the temperature to 60°F (16°C) and the
highest blower setting.
1. Defrost: Distributes outside air through the windshield defroster
and demister vents. Can be used to clear thin ice or fog from the
windshield. To exit
2. Fan speed control: Press to manually increase or decrease the
fan speed. To return to automatic fan operation, press AUTO.
3. Rear defroster: Press to defrost the rear window. Refer to Rear
R
window defroster in this section for more information. If your vehicle is
equipped with both rear defroster and heated mirrors, the same button
will activate both.
4. Passenger heated seat control: Press to heat the passenger
seat. Press once to activate high heat (two indicator lights). Press again
to activate low heat (one indicator light). Press again to deactivate the
passenger heated seat.
2009 Fusion (fsn)
Owners Guide, 2nd Printing
USA (fus)
select another mode.
Climate Controls
51