Advertisement
USE
• Never fill the kettle when it is on its base.
• Do not fill it above the max. level or below the min. level. If
the kettle is overfilled, boiling water may escape.
• Do not use without water.
• Check that the lid is closed properly to avoid steam near the
handle.
Fill the kettle with the required amount of
water.
You can fill the kettle through the spout
to keep the filter in good condition.
At the very least, cover the heating ele-
ment (or the bottom of the kettle) with
water.
Place the kettle on its base.
Connect to the mains.
Check that the electrical supply is compa-
tible with the power and voltage indica-
ted beneath your model.
• Only plug the kettle into a socket with
a built-in earth connection.
• Never release the lid whilst the water is
boiling.
Turn it on using the switch on the hand-
le. The kettle will turn itself off automati-
cally when the water is boiling.
Check that the kettle has stopped auto-
matically or turn it off manually before
removing it from the base to pour the
water.
The first two or three times that you use
the kettle, throw the water away because
it may contain foreign particles.
Rinse the kettle and filter separately.
• We recommend that you do not leave
any water in the kettle after use.
Advertisement
