How To Work The Controls; Notch; Sensitivity; Menu Selections - First Texas Products Gold Owner's Manual

OPERATION and CONTROLS
POWERING UP
Press
• The detector always starts up with the DISCRIMINATION feature
active.
Motion is required to detect metal.
• Sensitivity is at 70% of maximum
• All target categories are illuminated, meaning that all metal objects
will be detected.

HOW TO WORK THE CONTROLS

Press or Buttons
to CHANGE THE SETTING
of the active menu item.
The active menu item is
the Highlited line on the
left side of the display.
Press MENU button
menu item you
want to adjust.
10
Press or
to CHANGE THE SETTING
of the active menu item.
The active menu item is
the Highlited line on the
left side of the display.
to select the
OPERATION and CONTROLS

MENU SELECTIONS

1. DISC
Use
Each time you press
Elimination occurs from left to right. When a category description (for
example "IRON") disappears from the display, then targets classified in
that category will not be detected.
Pressing
, a category description will reappear, indicating that targets
classified in that category will again be detected.
Discrimination is a cumulative elimination system.
eliminated from left to right on the scale, with each additional press of
, resulting in more objects being eliminated from detection.

2. NOTCH

Press
Use
line is highlighted.
POWER
ON/OFF
Whereas the discrimination feature eliminates all categories sequentially
from detection, the NOTCH control allows you to selectively include or
exclude target categories from detection.
With each press of
display screen. As you move the position of the notched category, you
are changing the detection status of the selected category.
• If a target category was previously eliminated (word not visible)
then notching that category will return it to detection.
Buttons
• If a target category was previously retained (word is visible) then
notching that category will remove it from detection.
Only one target category at a time can be selected for notching. To notch
multiple categories in or out, press
highlighted. Each subsequent press of
notch. Each time you press
program will begin by changing the status of the IRON segment.
At any time, the display screen indicates the current category notches or
discrimination settings. Any category whose description is not visible will
not be detected.
and to increase or decrease DISCRIMINATION level.
, a target category is eliminated from detection.
reverses the discrimination process. With each press of
until "NOTCH" is illuminated on the display.
and to notch target categories IN or OUT while the NOTCH
or , the notched category moves across the
, followed by
Targets can be
again while NOTCH is
allows you to set an additional
, the notch
11