ElfinX TX-DSR16 Owner's Manual

Server and client

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

DigiNet User Manual

Server and Client

Model#: TX-DSR16

OWNER'S MANUAL

CONTENTS:

OPERATING INSTRUCTIONS

DESCRIPTION OF FUNCTIONS AND FEATURES

INSTALLATION GUIDE

Before proceeding, please read this manual thoroughly!

http://www.elfinx.com

Table of Contents

Need help?

Do you have a question about the TX-DSR16 and is the answer not in the manual?

Questions and answers

Summary of Contents for ElfinX TX-DSR16

Page 1 DigiNet User Manual Server and Client Model#: TX-DSR16 OWNER’S MANUAL CONTENTS: OPERATING INSTRUCTIONS DESCRIPTION OF FUNCTIONS AND FEATURES INSTALLATION GUIDE Before proceeding, please read this manual thoroughly! http://www.elfinx.com...
Page 2: Installation
(white/red wires). Lower 16 Pins are ground connection (gray wires) Extend Cards: Lower 4 Pins are positive connection and connect as picture on right (white/red wires). Top 4 Pins are ground connection (gray wires) http://www.elfinx.com...
Page 3 Storage – Percentage of space remaining on current drive. Quit – Exiting the DigiNet software. Camera – Click the desired numbered button to view the camera you want displayed on the screen. Screen Division – Select the divisions of cameras on the displayed screen. http://www.elfinx.com...
Page 4: Hardware Setup
External Monitor – If external monitor is being used, checkmark the cameras that are to be displayed on that monitor. Cameras are displayed in sequence. • [Select Time (sec)] – Enter the interval (in seconds) between each camera displayed. http://www.elfinx.com...
Page 5 • [Working sec] – Enter the length of time (in seconds) that the control is turned on, when activated by sensor(s) or manually on the display screen mode. Note: For information on connecting sensors/controls refer to Technician Training Manual (Section 10.83 Connecting Sensors/Controls) http://www.elfinx.com...
Page 6: Motion Setup
• Color of Motion Area: Select the color of motion detection area in the display mode between green or red. • Full Screen When Motion: Select from multi to full screen when activity is detected. • Set Quad Rotation Time: http://www.elfinx.com...
Page 7: Schedule Setup
• Sensor: Check to have sensor active recording. • Motion: Check to have motion active recording. • Pre-Alarm: 5. Copy To: Click here to copy recording setting to one or to all of the other cameras. http://www.elfinx.com...
Page 8 Screen Divisions: Choose the screen / split division (this allows you to hide any camera). Camera Selection: Select camera to be placed on the screen division. Large Screen: You can select the larger screens for magnification among the 6, 10, 13 divisions. Default: Initialize into default http://www.elfinx.com...
Page 9 Center PC. (If any other signal is detected during the transfer, the DVR will transmit the image again.) Emergency IP Address: Enter the IP address on “Emergency IP Address” to connect to a designated site. (Under LAN, Leased Circuit connection) http://www.elfinx.com...
Page 10: Site Information
Sensor Type: Select ‘8 SENSOR’ to use 8 Sensors, and ’16 SENSOR’ to use 16 Sensors. Proper number of Sensor buttons will be displayed in the surveillance mode when you chose ‘Sensor Type' . You’ll be able to see the proper number of buttons in ‘Hardware Setup’ and ‘Communication Setup’. http://www.elfinx.com...
Page 11: Password Setup
After selecting Advanced Security Setup the following dialog will appear: Input the User1 password and select OK in order to continue. When the window to the left appears, check the appropriate checkbox according to the desired option. http://www.elfinx.com...
Page 12: Audio Setup
Camera: Select the camera number to save and play the sound. Currently, sound data can be recorded only on one channel. You can choose the desired camera to record the sound. http://www.elfinx.com...
Page 13: System Setup
Video Format: Choose between NTSC and PAL. System Restart Time: This sets the time to reboot the system daily and automatically. To activate this, click on [Use]. 5. Backup Backup Settings: Is used to set a schedule for running backups. http://www.elfinx.com...
Page 14 You can choose either option. Set the Priority of the backup file by selecting an option from the Priority pull down menu. Select Add Media to add the type of backup. http://www.elfinx.com...
Page 15 Password text box. l) Select the appropriate remote drive by clicking the Select Drive button Select OK, then Add in the Add Schedule window when it appears. Review the scheduled backup, then select Setup to confirm the Backup Settings. http://www.elfinx.com...
Page 16 Camera Flip: Use this function when the dome camera is flipped. When the dome camera is installed in flip position, it will work in reverse. In this case , the dome camera may appear broken. This function therefore should be used to prevent something like this from happening. http://www.elfinx.com...
Page 17: Storage Setup
Allocation: Click on the desired drive to be allocated. (Note that Drive C cannot be reformatted since it holds the operating system). Proceed: Click to continue once the proper drives are selected for re-allocation. Cancel: Click here to cancel. http://www.elfinx.com...
Page 18 Sensor: Select the sensor, then click the desired position for the sensor on the E-Map.. In the Setting section, select the type of Camera, Sensor or Control from the pull down menu Note: To save the E-Map design, select the Save button at the bottom right. http://www.elfinx.com...
Page 19 16.0 Intelligent Search Mode: To activate Intelligent Search mode, go to setup and click on the “Site Information” tab and put a check mark on the “Use Intelli Search Tool Tip”. http://www.elfinx.com...
Page 20 Once you are in the Intelligent Search Mode the following screen will appear: To Search by Date and Time: By clicking on the following options, you can search one or more cameras: http://www.elfinx.com...
Page 21 The timeline indicates that there is recorded data in three cameras 1, 2, and 5 from 7AM to 9:30 AM. • A Pink bar indicates “Continuous Recording” • A Blue bar indicates “Motion Recording” • A Red bar indicates “Sensor Recording” • A Green bar indicates “Pre Alarm” http://www.elfinx.com...
Page 22 http://www.elfinx.com...
Page 23 http://www.elfinx.com...
Page 24 • Select the time of the image you wish to move to, and then click [Goto] • All changes will be inputted. • Selecting [OK] button will close the bookmark function and you will return to the search screen http://www.elfinx.com...
Page 25 Drive or a Local Drive (In this case select the drive letter of the CD Writer) Note: For more information on backing up to a remote drive see section 11.1 Setting a Local or Remote Backup Select Format CDR/CDRW to format the CD in order to proceed with the backup http://www.elfinx.com...
Page 26 10. The dialog box to the left will appear while formatting the CD, this should take approximately 1 minute (depending on the speed of the CD writer). 11. The window to the left appears after the CD has been formatted. Select OK to continue. http://www.elfinx.com...
Page 27 Select the priority of the backup from the Priority pull down Place a checkmark next to all the cameras that need to be backed up in the Camera section Select OK to begin backing up the desired video to CD in AVI format http://www.elfinx.com...
Page 28 Close to Read on Any Computer - Close the CD so it can be read automatically in most standard CD-ROM drives option. This will enable the CD to read in any CD drive. Select OK to complete the ejecting sequence. http://www.elfinx.com...
Page 29 The screen to the Left will appear indicating that the DigiNet Center is being installed When the screen to the left appears, select the Finish button Locate the DigiNet Center icon (as shown below) and double click to run the remote software http://www.elfinx.com...
Page 30 If the CD does not automatically begin setup, go to Windows Explorer and double click on the CD drive, then double click on the Data1 folder on the DigiNet Center CD, and finally, double click “setup.exe”. After installing your DigiNet Center software, modify your Display Properties to 1024x768 pixels and True Color (32 bit). http://www.elfinx.com...
Page 31: Getting Started
Drag & Drop: To add a specific camera to a particular division, drag it from the column on the right side and drop it into the desired division to replace or add to the division the activity of the indicated camera. http://www.elfinx.com...
Page 32 Cancel: Allows user to cancel the connection. Password: Enter the password required to connect to the remote location. Confirm: Enter the password again to confirm. Note: once the user clicks “connect”, the ‘Connecting SITE – LAN’ window will appear, showing the status of the connection. http://www.elfinx.com...
Page 33 Once you have selected the camera(s), you can click on the “Now” button and this will activate your camera (s). If you do not select a camera(s) and click “now”, the following prompt will appear. http://www.elfinx.com...
Page 34: Search Screen
Before you can view a camera remotely, turn off camera viewing by selecting “Stop”. The following window will appear: Camera: First, you must select the camera that you want to view then select the month, date, hour, and minute. After selecting, your camera(s), date, and time, you can play forward or reverse. http://www.elfinx.com...
Page 35: Setup Menu
About the DigiNet Center: This function allows users to find out about their system and setup their connection to view their camera remotely. This window provides information on your current computer and the version of DigiNet Center that you are using. http://www.elfinx.com...
Page 36: Setup & Configuration
Received data save setup: This allows users to download video either in a search mode or display mode. It also stores the data on your internal hard drive. Modem: This allows users to choose between regular phone line or LAN/High speed Internet boardband connection. http://www.elfinx.com...
Page 37 Allows User 1 to enable search mode as well as enable cameras. Advanced Security Setup After selecting following dialog will appear: Input the User1 password and select in order to continue. When the window to the left appears check the checkbox appropriate according to the desired options. http://www.elfinx.com...
Page 38 Camera 9 - 12: 4 Divisions are showing cameras 9 through 12. Camera 13 - 16: 4 Divisions are showing cameras 13 through 16. 9 Cameras: Shows up to 9 camera divisions. 6 Cameras: Shows up to 16 camera divisions. About Dialog: Displays copyright information about DigiNet Web Security http://www.elfinx.com...
Page 39 Zoom: Increase or decrease the zoom using the plus/minus (+/-) buttons. Focus: Adjust the focus using the plus/minus (+/-) buttons. Go-to/Setup: Click this button to set the preset positions. See E): When setup is complete click the Setup button. Preset Positions: Camera positions. http://www.elfinx.com...
Page 40: Appendix I: Formatting A Cd With Directcd
Next to continue. Select the drive letter corresponding with the correct CD Writer. Select Next to continue Enter the desired name of the backup CD Select Finish to begin formatting the CD. - Thanks for purchasing elfinx products - http://www.elfinx.com...