4-447-481-11(1)
CD/DVD Player
Reference Guide
DVP-SR510H
© 2012 Sony Corporation Printed in China
ˋ Consult the dealer or an experienced radio/TV
ˎ
WARNING
technician for help.
Important Safety Instructions
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
1) Read these instructions.
To avoid electrical shock, do not open the
2) Keep these instructions.
cabinet. Refer servicing to qualified personnel
3) Heed all warnings.
only.
4) Follow all instructions.
The AC power cord must be changed only at a
5) Do not use this apparatus near water.
qualified service shop.
Batteries or batteries installed apparatus shall
6) Clean only with dry cloth.
not be exposed to excessive heat such as
7) Do not block any ventilation openings. Install in
sunshine, fire or the like.
accordance with the manufacturer’s
instructions.
CAUTION
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other
The use of optical instruments with this product
apparatus (including amplifiers) that produce
will increase eye hazard. As the laser beam used in
heat.
this CD/DVD player is harmful to eyes, do not
9) Do not defeat the safety purpose of the
attempt to disassemble the cabinet.
polarized or grounding-type plug. A polarized
Refer servicing to qualified personnel only.
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement of
the obsolete outlet.
10) Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
This symbol is intended to alert the
the apparatus.
user to the presence of uninsulated
11) Only use attachments/accessories specified by
“dangerous voltage” within the
the manufacturer.
product’s enclosure that may be of
12) Use only with the cart, stand, tripod, bracket, or
sufficient magnitude to constitute a
table specified by the manufacturer, or sold
risk of electric shock to persons.
with the apparatus. When a cart is used, use
This symbol is intended to alert the
caution when moving the cart/apparatus
user to the presence of important
combination to avoid injury from tip-over.
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
Precautions
13) Unplug this apparatus during lightning storms
ˎ To prevent fire or shock hazard, do not place
ˎ
or when unused for long periods of time.
objects filled with liquids, such as vases, on the
14) Refer all servicing to qualified service
apparatus.
personnel. Servicing is required when the
ˎ The player is not disconnected from the AC
ˎ
apparatus has been damaged in any way, such
power source as long as it is connected to the
as power-supply cord or plug is damaged,
wall outlet, even if the player itself has been
liquid has been spilled or objects have fallen
turned off.
into the apparatus, the apparatus has been
ˎ Do not install this player in a confined space,
ˎ
exposed to rain or moisture, does not operate
such as a bookshelf or similar unit.
normally, or has been dropped.
ˎ Install the player so that the AC power cord can
ˎ
be unplugged from the wall socket immediately
Region code
in the event of trouble.
Your player has a region code printed on the back
ˎ If the player is brought directly from a cold to a
ˎ
of the unit and only will play commercial DVDs
warm location, or is placed in a very damp room,
labeled with an identical region code or
.
moisture may condense on the lenses inside the
player. Should this occur, the player may not
Copyrights and trademarks
operate properly. In this case, remove the disc
and leave the player turned on for about half an
ˎ Manufactured under license from Dolby
ˎ
hour until the moisture evaporates.
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
For customers in the USA
ˎ “DVD Logo” is a trademark of DVD Format/Logo
ˎ
Owner’s Record
Licensing Corporation.
The model and serial numbers are located at the
ˎ MPEG Layer-3 audio coding technology and
ˎ
rear of the unit. Record the serial number in the
patents licensed from Fraunhofer IIS and
space provided below. Refer to them whenever
Thomson.
you call upon your Sony dealer regarding this
ˎ Windows Media is either a registered trademark
ˎ
product.
or trademark of Microsoft Corporation in the
United States and/or other countries.
Model No.______________
This product contains technology subject to
Serial No.______________
certain intellectual property rights of Microsoft.
Use or distribution of this technology outside of
CAUTION
this product is prohibited without the
You are cautioned that any changes or
appropriate license(s) from Microsoft.
modifications not expressly approved in this
ˎ This DVD player incorporates High-Definition
ˎ
manual could void your authority to operate this
Multimedia Interface (HDMI™) technology. HDMI,
equipment.
the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered
Note
trademarks of HDMI Licensing LLC in the United
This equipment has been tested and found to
States and other countries.
comply with the limits for a Class B digital device,
ˎ This product meets ENERGY STAR
ˎ
guidelines
pursuant to Part 15 of the FCC Rules. These limits
for energy efficiency.
are designed to provide reasonable protection
ENERGY STAR and the ENERGY STAR mark are
against harmful interference in a residential
registered U.S. marks.
installation. This equipment generates, uses, and
ENERGY STAR is a registered mark owned by the
can radiate radio frequency energy and, if not
U.S. government.
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
ˋ Reorient or relocate the receiving antenna.
ˎ
ˋ Increase the separation between the equipment
ˎ
and receiver.
ˋ Connect the equipment into an outlet on a
ˎ
circuit different from that to which the receiver is
connected.