Grace Digital GDI-IRDT200 User Manual page 22

5. Turn the Dial until the display says < < Set Time/Date>
6. Press the 'Select' button.
7. Turn the Dial until the correct t t ime zone is seen on the display. Push the 'Select' button to
set your time zone. Then turn the Menu Dial until the hour setting is correct, then press the
'Select' button.
8. Turn the Dial until the minute setting is correct, then press the 'Select' button.
The display shows < < Set Time> with the new time shown beneath for 3 seconds, then returns
to the menu, press the 'Back' button 2 times to go to the main menu.
22
Sleep Timer
< Set Time/Date
Set Alarm
DST
Pacific
Central
Eastern
Set Time
1:30 PM
Set Time
1:34 PM
>