Speed Dial; Place A Call With A Speed Dial Button; Transfer - Cisco 6901 User Giude

Your coworker's Line button flashes red.
–
When the Line button flashes red, your coworker can pick up the call.
Related Topics
Answer a Call Using Pickup, page 19
Answer a Call Using Group Pickup and a Group Pickup Number, page 19

Speed Dial

(Cisco Unified IP Phone 6911 only)
Speed dial features allow you to press a button and enter a preconfigured code to place a call. Before
you can use speed dial features on your phone, you must set up speed dial on your User Options Web
pages.
Depending on setup, your phone can support this speed dial feature:
• Feature Button—Allows you to quickly dial a phone number if the button and a code is set up for
speed dialing.

Place a Call with a Speed Dial Button

(Cisco Unified IP Phone 6911 only)
(Before you can use speed dial buttons on your phone, you must set up speed dial on your User Options
Web pages.)
To place a call, press the Feature button enabled for speed dial.

Transfer

Transfer allows you to redirect a connected call from your phone to another number.
• You can redirect a single call to another number that you specify. Transfer is accomplished
differently depending on the phone model you have:
Hookflash is used to transfer calls from the Cisco Unified IP Phone 6901.
–
The Transfer button
–
• You can connect two calls to each other (without remaining on the line yourself).
26
is used to transfer calls from the Cisco Unified IP Phone 6911.
OL-24581-01