CONTENTS Instructions for the user Instructions for the installer Important Safety Instructions Technical specifications Description of the Appliance Installation Positioning Cleaning the interior Electrical connection Starting-up Door reversibility Temperature control Instructions for totally built-in appliances Fresh food refrigeration Inner arrangement Positioning the door shelves Hints Hints for refrigeration...
IMPORTANT SAFETY INSTRUCTIONS It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings.
Installation Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Parts which heat up should not be exposed. Important: if the supply cord is damaged, it must Wherever possible the back of the product should be against a wall.
Cleaning the interior Fresh food refrigeration Before using the appliance for the first time, wash the The refrigerator compartment is suitable for cooling interior and all internal accessories with lukewarm drinks and for normal food storing. water and some neutral soap so as to remove the To obtain the best performance, do not store warm typical smell of a brand-new product, then dry food or evaporating liquids in the refrigerator and do...
Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be adjusted in height. To make these adjustments proceed as follows: Gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required. D007 For more thorough cleaning, the top door shelf can be removed by pulling it in the direction of the arrows,...
MAINTENANCE Unplug the appliance before carrying out any maintenance operation. Warning This appliance contains hydrocarbons in its cooling unit maintenance and recharging must therefore only be carried out by authorised technicians. Defrosting Frost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, during normal use.
CUSTOMER SERVICE AND SPARE PARTS If the appliance is not functioning properly, check To obtain fast service, it is essential that when that: you apply for it you specify the model and serial number of your appliance which can be found on the plug is firmly in the wall socket and the mains the guarantee certificate or on the rating plate power switch is on;...
Door reversibility The appliance’s door has been locked in position for transport by means of pins on both sides. According to the door opening direction, remove relevant pins at the top and at the bottom. D163 Instructions for totally built-in 50 mm appliances Dimensions of the recess...
Page 10
4. Open the door and push the appliance against the side of the kitchen unit opposite to that of appliance hinges. Fasten the appliance with 4 screws provided in the kit included with the appliance. Snap vent grille (C) and hinge cover (D) into position. D727 5.
Page 11
8. Fix cover (C) on guide (A) until it clips into place. P R 33 /2 9. Open the appliance door and the furniture door at 90°. Insert the small square (B) into guide (A). Put together the appliance door and the furniture door and mark the holes as indicated in the figure.
Need help?
Do you have a question about the FI 160 FA and is the answer not in the manual?
Questions and answers