Cisco WAP121 Datasheet page 6

Specifications
Receiver sensitivity
Wireless Distribution System
(WDS)
Roaming
Multiple SSIDs
Wireless VLAN map
WLAN security
WMM
Operating Modes
Access point
Environmental
Power
Certifications
Operating temperature
Storage temperature
Operating humidity
Storage humidity
Mean time between failures
(MTBF)
Package Contents
● Cisco WAP121 Wireless-N Access Point with Single Point Setup
● Ceiling/wall mounting kit
● User guide on CD-ROM
● Quick-start guide
● Ethernet network cable
● 12V, 0.5A power supply
Minimum Requirements
● 802.11b, 802.11g, 802.11n wireless adapter with TCP/IP protocol installed per PC
● Switch/router with PoE support or PoE injector when used with PoE
● Web-based configuration: Java-enabled web browser
Warranty
Access point
Power supply
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Description
● 802.11b: 11 Mbps @ –86 dBm
● 802.11g: 54 Mbps @ –71 dBm
● 802.11n: 300 Mbps @ –64 dBm
Yes
Yes
4
Yes
Yes
Yes, with unscheduled automatic power save and voice profile
Access Point mode, WDS bridging, Workgroup Bridge mode
12V, 0.5A DC input, and IEEE802.3af compliant PoE
FCC class B, CE, IC, Wi-Fi
0° to 40° C (32° to 104° F)
–20° to 70° C (–4° to 158° F)
10% to 85% noncondensing
5% to 90% noncondensing
531189 hours
Limited lifetime
1-year warranty
Page 6 of 7