Assembly - Lexen Healthy Juicer Electric User Manual And Recipes

Assembly

Electric
Electric
Step 1 - Ensure the machine is
switched OFF and the Locking
collar is set to the "RELEASE"
position. Now insert the juic-
ing body and push firmly into
����
place, then turn the locking
�������
collar to the "LOCK" position.
The open end of the juicing
body should be resting on the
supporting pillar.
Step 2 - Insert either the
orange vegetable auger or
the green wheat grass auger,
be careful to insert the auger
fully. Note: when inserted
����
properly only the stainless
�������
steel part of the auger will
protrude from the juicing
body.
���������� �����
Step 3 - Place the washer into
the end cap.
Step 4 - Attach the end
����� � ��������� �����
cap turning in a counter
clockwise direction, use the
enclosed wrench to tighten,
but do not over tighten.
NOTE: collar will not lock if
washer is not inserted!
Step 5 - Attach the splash
guard to the end cap. Place
the juice cup under the juic-
����
�������
ing body making sure it is
resting on the rubber tabs.
Place and the waste cup at
the end to collect the waste
pulp. Plug unit into an electric
wall socket.
5