Omega WMS831 User Manual

Wireless data logging weather station

Advertisement

Quick Links

®
User' s Guide
Shop online at
omega.com
®
e-mail: info@omega.com
For latest product manuals:
omegamanual.info
MADE IN CHINA
WMS831
Wireless Data Logging

Weather Station

Advertisement

Table of Contents
loading

Summary of Contents for Omega WMS831

  • Page 1: Weather Station

    ® User’ s Guide Shop online at omega.com ® e-mail: info@omega.com For latest product manuals: omegamanual.info MADE IN CHINA WMS831 Wireless Data Logging Weather Station...
  • Page 2 Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification. The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves the right to alter specifications without notice.
  • Page 3: Installation

    INSTALLATION • 328 feet (100 meters) transmission range without interference Our Omega’s Full Weather Station #WS821 operates at 433MHz radio frequency, so no wire installation • LCD display of measured temperature and humidity is required between the main unit (receiver) and the remote weather sensors (transmitters). The remote •...
  • Page 4: Placement Tips

    A. LED INDICATOR BATTERY INSTALLATION • Unlock the funnel-shaped top on the rain gauge by turning both knobs on the sides in a Counter- • Flashes once when the remote sensor transmits a reading to the main unit. clockwise direction. •...
  • Page 5: Operation

    ASSEMBLY Placement tips • With a flashlight, look into the mounting hole that will receive the anemometer axle shaft, on the • Make sure that the main unit is locating within the operating range of all remote weather sensors. back of the wind cups. Check that the set screw is backed off appropriately, not obstructing the •...
  • Page 6 NAVIGATING THROUGH THE MODES WIND WINDOW The main unit has five (5) different modes (windows) displaying separate data: Weather Forecast, Clock Displays: & Alarm, Temperature and Humidity, Rain, and Wind. When a specific mode is selected the • Wind Chill temperature corresponding icon begins flashing.
  • Page 7 CHANGING THE SEA LEVEL PRESSURE AND ALTITUDE UNIT • Press SET to confirm selection. • Press SET until the local pressure with the word “SEA LEVEL” is displayed. • Select the City Code for your area by pressing UP or DOWN . Refer to P.25 for a list of available codes.
  • Page 8 • During night-time hours, atmospheric disturbances are typically less severe and radio signal REMOTE SENSOR STATUS reception may improve. A single daily reception is sufficient enough to keep the clock accuracy The wave icon above the current channel display shows the connection status of the corresponding within 1 second.
  • Page 9: Maintenance

    VIEWING WIND STATISTICS Q: “The weather readings on my weather station are different from the TV, radio or official weather reports.” In the Wind Mode, press the MEMORY button to recall a current wind speed, a daily maximum wind speed with “DAILY MAX” displayed, a gust speed with a “GUST” displayed and a daily maximum gust A: The weather data may vary considerably due to different environmental conditions and placement speed with a “GUST DAILY MAX”...
  • Page 10: Specifications

    Humidity (Outdoor) WORLD CITIES Humidity (Indoor) Operating Range: 0% to 99% City Code Zone DST City Code Zone Operating Range: 0% to 99% Resolution: 1% Offset Offset Resolution: 1% Accuracy: 5% Addis Ababa, Ethiopia Cairo, Egypt Accuracy: 5% Sampling Interval: 10 seconds Adelaide, Australia Calcutta, India Sampling Interval: 10 seconds...
  • Page 11 Where Do I Find Everything I Need for Process Measurement and Control? OMEGA…Of Course! Shop online at omega.com TEMPERATURE Thermocouple, RTD & Thermistor Probes, Connectors, Panels & Assemblies Wire: Thermocouple, RTD & Thermistor Calibrators & Ice Point References Recorders, Controllers & Process Monitors...

Table of Contents