Remington MS-6000 Use And Care Manual

®
®
MC
When using an electrical appliance, basic precautions should always be observed,
including the following. Read all instructions before using this shaver.
Use and Use and
DANGER
Care Guide Care Guide
To reduce the risk of electric shock:
Do not reach for an appliance that has fallen into water. Unplug it immediately.
■
■ Do not use while bathing or in the shower.
■ Do not place or drop into water or other liquid.
®
■ Do not place or store this appliance where it can fall or be pulled into a tub or sink.
■ Except when charging, always unplug this appliance from the electrical outlet
immediately after using.
■ Unplug this appliance before cleaning it.
■ Use only when the shaver is in dry condition.
■ Detach the appliance from the power supply cord before cleaning.
■ Do not submerge shaver in water.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
■ This appliance is for household use only.
®
■ An appliance should never be left unattended when it's plugged in, except when
charging a rechargeable appliance.
■ Close supervision is necessary when this appliance is used by, on, or near
children and persons with special needs or certain disabilities.
■ Use this appliance only for its intended use as described in this manual. Do not
use attachments not recommended by manufacturer.
■ Keep the cord away from heated surfaces.
MS-6000
36186_MS_6000_IBA.indd 1
■ Never operate this appliance if it has a damaged cord or plug, if it is not
IMPORTANT SAFETY
working properly, if it has been dropped or damaged, or if it has been dropped
into water.
INSTRUCTIONS
■ Never drop or insert any object into any of the appliance's openings.
■ Do not use outdoors or operate where aerosol (spray) products are being used,
or where oxygen is being administered.
■ Always store this appliance and cord in a moisture-free area.
Do not store it in temperatures exceeding 140°F (60°C).
■ Do not plug or unplug this appliance when your hands are wet.
■ Do not use an extension cord or a voltage converter with this appliance.
■ Do not wrap the cord around the appliance.
■ Always attach the plug to the appliance, then to the outlet. To disconnect, turn
all controls to OFF, then remove plug from outlet. Detach removable power
cords from appliances for storage.
■ Do not use this appliance with a damaged or broken screen or
cutters, as injury may occur.
■ Shavers are for use on facial hair only. They should not be used for shaving
the hair on your head or any other part of your body.
SAVE THESE INSTRUCTIONS
Product Features
Congratulations on your purchase of a premium Remington shaver.
(B)
Shaver Parts
(A) Screen & cutter assembly
MS-6000 Cord/cordless MS-6000 Cord/cordless Cord/cordless Cord/cordless Cord/cordless Cord/cordless Cord/cordless
(B) Pop-up mini-foil
(A)
(C) Mini-foil push tab
(D) Beard-lifting fins
Quick Charge
(E) 3-position trimmer
Quick Charge shavers recharge in one hour. Five minutes gives you enough power for a
(E)
(F) Trimmer push tab
single shave.
(G) ON/OFF button
(H) POWER RESERVE button Power Reserve
(F)
(I) Head release button MicroScreen ® shavers will run 55 minutes on a single charge. If those
(I)
(one on each side)
55 minutes end in the middle of a shave, you can push the Power
(J) LCD
Reserve button to get an extra 5 minutes of power. While using the
(K) (K Head guard (K)
Power Reserve, the plus sign on the Power Reserve button will glow
(L) Cleaning brush ) Cleaning brush )
green. The Power Reserve button will not activate the shaver if there is
(M) Power cord
any charge left on the battery.
LCD Indicator
■ The LCD numeric indicator shows how many minutes are left on
(J)
the charge.
■ When the LCD's plug outline fills in, it means you have
(G)
approximately 5 to 6 minutes of shaving time left.
(H)
■ When the LCD's screen outline fills in, it means it's time to
replace the shaver's screens and cutters.
Worldwide Voltage
The MicroScreen
(B)
conversion, providing AC current between 100-240 volts AC, 50-60 Hz.
Just plug it in to the local outlet (you may need an adapter plug) and
(D)
use as usual. Your shaver will convert automatically to the local current
(E)
requirements.
(F)
(C)
(L) How To Use
Charging
Before using your shaver for the first time, put it on charge for 24 hours. NOTE: It may
take up to 3 cycles for the battery to reach full capacity.
(M)
(K)
To Charge Your Shaver:
■ Use only the charging adapter supplied with the shaver.
■ Make sure your shaver is turned off.
■ Connect the cord to the shaver, then plug the charging adapter into the electrical
outlet. A charging indicator light will come on.
■ Your shaver cannot be overcharged, so you can leave it plugged in and charging
between shaves.
Power Power LCD Worldwide
Quick Run
■ To preserve the life of the batteries, let them fully run out every six months, then
system Washable charge time reserve screen voltage
recharge them for a full 24 hours.
X X X X X X X X X X X X X X 55 min 5 min 55 min 5 min 55 min 5 min 55 min 5 min 55 min 5 min 55 min 5 min 55 min 5 min X X X X X X X X X X X X X X
■ Cord/cordless rechargeable shavers can run directly off the cord if necessary. They will
not recharge while you are shaving, so after shaving with the cord, turn the unit off
and set it aside to charge. Cord/cordless shavers should not be used strictly as cord-
operated shavers, as continued cord-only use will result in reduction of battery life.
■ Quick Charge provides up to three weeks of shaving after a one-hour charge, or a
single shave after a five-minute charge.
■ If your shaver's charge runs out in the middle of a shave, you can push the power
reserve button to get an extra 5 minutes of power.
NOTE: If your shaver battery is completely discharged or the shaver has not been
used for a long time, the shaver may not start when operated using the cord. If this
happens, charge the shaver for approximately five minutes before shaving.
Removing the Headguard
Before operating your shaver, remove the headguard, which
protects the screen and cutter assembly. Simply push up from the
front or the back until it pops off. (Diagram A)
! Always keep the protective head guard on the shaver head and Always keep the protective head guard on the shaver head and
keep the trimmer in the OFF position when the shaver is out of the
cleaning base and not in use.
Operating the Pop-up Trimmer
® Shaver features worldwide automatic dual voltage Your shaver is equipped with a pop-up trimmer. Use the trimmer
push tab to extend or retract the trimmer.
1. Completely retracted (down), the trimmer is out of the way and off,
for when you want to use the screens alone. Press the trimmer
down with your thumb to get it into this position. (Diagram B)
2. In the middle position, the trimmer works with the screens, cutting the longer, hard-to-
shave hairs so the screens can get in extra close. Slide the trimmer into the position
level with the foils.
3. Fully extended (up), the trimmer can be used to trim your sideburns and mustache.
Slide the trimmer into the top position, above the foils.
A
B
6/17/08 4:18:06 PM