Recording Video And Taking Pictures - Naxa NMV-179 Instruction Manual

In addition to the above file conversion methods, the AV files
stored in the hard disk may also be selected and converted by
right clicking the mouse and selecting the start video conversion
in the pop-out menu, and the tool will automatically run and
directly start file conversion.

Recording Video and Taking Pictures

1.Opening the video window
When the PC camera is connected, the tool will automatically
pop out the video window; when the PC camera connection is
completed, and the video window is in hidden status, click the
icon on the right side of the tool interface to make the video
window shown. If the PC camera is not connected, click
the button and the tool will prompt PC camera not connected .
2.Recording video and taking pictures
Default storage directory is the same
as the storage directory of the
converted video files, which can be
specified by clicking the icon
the select directory window. The
changed path will be displayed in the
path column. Click icon
interface to change parameters for recording video or taking pictures.
3.Recording and playing video
Record: in the viewfinder status of the video interface, click the
icon to start recording video files, and video recording will
be displayed at the bottom of the video interface. When a video
file is being recorded, the start icon becomes a pause icon, and at
the same time the stop icon is active.
Pause: under the recording mode, click the icon
recording,and at the same time the start and stop record icons are
active.
in
to enter the PC camera setting
25
to pause