Zanussi ZWD 14791 W User Manual page 11

press this button the drying time increases by 5 mi-
nutes.
Note!
The programme time will automatically increase by
some minutes.
6. Press button 8 to start the programme.
After the programme has started, the time remaining
is updated every minute.
Note!
The different type of cottons (towelling, sheets,
shirts, and so on) or any laundry items rolling up
during the spinning phase may result in partial dry-
ness. In the exceptional case that at the end of the
cycle the laundry remains slightly wet, we suggest
that you unfold the rolled up items, redistribute them
evenly in the drum and select an additional drying
cycle of 20-30 minutes.
7. At the end of the programme, the buzzer sounds and
three blinking «0.00» appear on the display and the
door is locked.
The last 10 minutes of the drying cycle correspond
to an anti-crease phase. During this time the door is
locked and the display keeps showing three flashing
zeros «0.00».
If you wish to open the door before or during the
anti-crease phase or to interrupt it, press any button
or turn the programme selector dial to any programme po-
sition (except O).
8. Turn the selector dial to the O position to switch the
machine off.
9. Remove the laundry.
Drying only
Warning!
The recommended load size is 4 kg for cottons and linen,
and 3 kg for synthetic items.
By pressing Drying Time button it is also possible
to dry up to 6 kg of cotton items (see the «Drying
Programme » table).
Warning!
The water tap must be open and the drain hose must be
positioned in the sink or connected to the drain pipe.
1. Load the laundry.
2. Select a spin cycle at the maximum spin speed al-
lowed for the type of laundry in order to obtain the
best drying performances.
3. Select the drying programme for Cottons or Synthet-
ic in the Drying sector of the programme selector di-
al.
4. If you wish to select an electronic drying, depress
the button 4 until the icon corresponding to the re-
quired dryness degree appears on the display,
marked with the icon
5. If you wish to select a timed drying, press button 5
until the time you want appears on the display (see
the «Drying Programme» table). Every time you
press this button the drying time increases by 5 mi-
nutes.
Note!
The programme time will automatically increase by
some minutes.
6. Press button 8 to start the programme.
After the programme has started, the time remaining
is updated every minute.
Note!
The different type of cottons (towelling, sheets,
shirts, and so on) or any laundry items rolling up
during the spinning phase may result in partial dry-
ness. In the exceptional case that at the end of the
cycle the laundry remains slightly wet, we suggest
that you unfold the rolled up items, redistribute them
evenly in the drum and select an additional drying
cycle of 20-30 minutes.
7. At the end of the programme, the buzzer sounds and
three blinking «0.00» appear on the display and the
door is locked.
The last 10 minutes of the drying cycle correspond
to an anti-crease phase. During this time the door is
locked and the display keeps showing three flashing
zeros «0.00».
If you wish to open the door before or during the
anti-crease phase or to interrupt it, press any button
or turn the programme selector dial to any programme po-
sition (except O).
8. Turn the selector dial to the O position to switch the
machine off.
9. Remove the laundry.
.
11