HP ProBook 4710s Quickspecs page 12

QuickSpecs
Memory
800 MHz DDR2 SDRAM, or 1066/1333 MHz DDR3
Two DIMM slots supporting dual channel memory
DIMM sizes supported: 1024 MB and 2048 MB
Standard Memory
Optional Memory
Upgrades
Up to
1024 MB
2048 MB
3072 MB
4096 MB
8192 MB
* Maximum memory speed will vary based on system configuration.
NOTE: This chart does not represent all possible memory configurations. Due to the non-industry standard nature of some third-party
memory modules, we strongly recommend using only HP branded memory modules to ensure compatibility. If you mix memory
speeds, the system will perform at the lower memory speed. Full availability of 4 GB or more of memory requires Windows Vista
Business 64-bit or Linux. With Windows 32-bit operating systems, the amount of usable memory is dependent upon your
configuration, so that above 3 GB all memory may not be available due to system resource requirements.
Memory Upgrades
SDRAM*
1024 MB (1024 MB x 1)
2048 MB (2048 MB x 1 or 1024 MB x 2)
3072 MB (2048 MB x 1024 MB)
4096 MB (2048 MB x 2)
Support for up to 8192 MB of memory with the installation of optional DDR2 SDRAM memory kits. Both
memory slots are user accessible. Please refer to the Hardware and Software Guide for installation
procedures. Maximized dual-channel performance requires SODIMMs of the same size and speed in both
memory slots.
HP 1 GB (DDR2 800 MHz) SODIMM
HP 2 GB (DDR2 800 MHz) SODIMM
HP 4 GB (DDR2 800 MHz) SODIMM
HP 1 GB (DDR3 1333 MHz) SODIMM
HP 2 GB (DDR3 1333 MHz) SODIMM
HP 4 GB (DDR3 1333 MHz) SODIMM
DA - 13252 North America — Version 11 — February 3, 2010
Slot 1
1024 MB
1024 MB
2048 MB
2048 MB
4096 MB
HP ProBook 4710s Notebook PC
Slot 2
Empty
1024 MB
1024 MB
2048 MB
4096 MB
KT292AA
KT293AA
KT294AA
AT911AA
AT912AA
AT913AA
Page 12