3A. Using The Hnt1A Phone With Skype; Connecting The Hnt1A Usb Phone; Calling A Skype ® User; Prerequisites - Hawking Net-Talk HNT1A Quick Installation Manual

HNT1A Internet Phone User's Manual

3a. Using the HNT1A Phone with Skype

Connecting the HNT1A USB Phone

When the USB Phone is connected to a computer, the LCD backlight will turn on
and the device will connect to the installed Net-Talk™ software. When the
connection has been established, the screen will display
which means the HNT1A is ready for use.
Note: If Connecting...
have a problem communicating with Skype. Please check your internet connection.
If you are connected, but the problem persists, please to the "Troubleshooting"
section of this manual to resolve this problem.
Calling a Skype ® User

Prerequisites

To call a Skype user,
added Skype ® user(s) to your contact list, you can start making calls using the
HNT1A Net-Talk
a detailed description of its functions, please go to Skype's homepage
(http://www.skype.com).

Loading the Contact List onto the LCD Display

1. Press the Right Directional Menu key (Contact List key) to load the Skype
contact list. Only one contact is displayed at a time. The top-right icon
indicates the online status of the contact. The
while the
are online.
2. Use the Up / Down Directional Menu keypad to select the desired contact. (To
exit the contact list, press the Contact List key again or press the hang up (
key.
keeps showing on the display screen, the device might
launch Skype ® and log in. After you have
you need to
phone. For additional instructions on how to use Skype ® and
TM
symbol means offline. You can only make calls to users who
14
®
Hawking Technologies
symbol means online
)