Advertisement
Caution: The Dome Light uses bulbs which can be VERY HOT! Do not touch a bare bulb
when it is lighted.
2. Operation:
• The fixture has two switches, which control each of the two lamps independently.
• Pressing each switch once turns the lamp on, and pressing it a second time turns the
lamp off.
3. Troubleshooting:
• In the event of improper operation, first check that the switches are turned on.
• Second, check the each bulb and replace if burned out.
• Third, check the fuse (if installed) and replace if necessary.
• Finally, use a voltmeter to ensure that the fixture is receiving adequate power. The
light requires nominally 12 VDC for correct operation. Voltage must be measured
using the fixture power leads, not the vehicle chassis. Correct any faults found.
REPLACEMENT PARTS:
Part #
KRM89073-17
Clip Here
TEMPLATE:
Description
Automotive Type 918 Replacement Lamp, 7 Watt, 12 VDC
Wireway
5-5/16"
∅0.17 (11/64" Drill)
Mounting Holes
Clip Here
KR-DL-INST-9-05
Advertisement
