Advertisement
S P E C
F I L E
Ceiling Mount Bracket for lower ceilings
Description
This ceiling mount bracket is to be used when mounting LCD projectors, such as the PT-L797,
to the low ceiling. It is also used when replacing an existing CRT projector with a Panasonic
LCD projector.
Specifications
Vertical correction angle:
Horizontal slant correction angle:
Horizontal turn correction angle:
Dimensions (W x H x D):
Weight:
Parts
Attachment plate . . . . . . . . . . . . . . . .1
Main unit fixture . . . . . . . . . . . . . . . . .1
Projector mount bracket A . . . . . . . . .1
Projector mount bracket B . . . . . . . . .1
Hanging fixtures (right and left) . .1 each
Safty fitting . . . . . . . . . . . . . . . . . . . .1
Bolt and washer assembly (M4 x 8) . . .7
Hexagon socket head bolts (M6 x 16) 16
Caution:
Mounting should be done by a qualified technician. Make sure that the mounting (ceiling) area has
sufficient strength. Read the enclosed mounting instructions thoroughly before starting.
Dimensions
The assembled ET-PK097S with a
projector mounted
151–167
137.5
as of January 1999
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Attachment plate
319
275
402
ET-PK097S
±10°
±10°
±10°
449 x 218 x 402 mm
(17-11/16˝ x 8-19/32˝ x 15-13/16˝)
8.0 kg (17.6 lbs)
Hanging bolts (M10 x 600) . . . . . . . . .4
Hexagon nut (M10) . . . . . . . . . . . . . .16
Spring washer (M10) . . . . . . . . . . . . .8
Flat washer . . . . . . . . . . . . . . . . . . .16
Filter cover . . . . . . . . . . . . . . . . . . . .1
Filter . . . . . . . . . . . . . . . . . . . . . . . . .1
Panasonic logo sticker . . . . . . . . . . . .1
Note: This illustration is not drawn to scale.
Attachment Plate
130
175
254
137.5
316
unit: mm
1
Advertisement
