Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for iHome iHome iBT52
- Page 1 iBT52 Portable USB Bluetooth Receiver Instruction manual...
-
Page 2: Maintenance
Introduction Thank you for purchasing the iHome iBT52. This product is designed to provide high quality wireless sound and speakerphone capability to audio devices equipped with line-in jacks, and to headphones. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit. - Page 3 Meet Your iBT52 iBT52 Home Docking Station Side Front Micro USB Audio Plug Plug iBT52 Bluetooth Receiver Micro USB Charging Port Aux-out Jack Side Front Sport Clip Microphone Backlit Pairing/Operation Button with Indicator Light...
- Page 4 Powering and Charging the Unit Using the USB Wall Adaptor 1. Gently connect the Bluetooth Receiver to the Docking Station’s micro USB plug and audio plug by sliding the Receiver onto the plugs. 2. Connect the standard USB plug of the Docking Station into the USB Wall Adaptor.
-
Page 5: Using Bluetooth: Pairing Your Device
NOTE: If the unit is charging while pairing is attempted, the light will continue to blink blue and red. “iHome iBT52” should appear on your device’s menu. If “Not Paired”, “Not Connected” or similar appears on your display, select “iHome iBT52”... - Page 6 2. Move the Power On/Off Switch to the ON position (right) and wait 3 seconds to listen to audio streamed wirelessly from your paired iPad, iPhone, iPod or other Bluetooth device. Button/Indicator Light on the Receiver will flash blue as the unit searches for a previously paired device, and then flash blue twice every 7 seconds once a previously paired device is detected.
- Page 7 Using with a Paired Phone Pair your Bluetooth-capable phone as described under Pairing. While the Bluetooth Receiver is connected to an audio device such as a speaker or earphones, you can use the device as speakerphone. Answering Calls Press and release the Button to answer a call.
-
Page 8: Troubleshooting
Troubleshooting Unit doesn’t respond (no power) • Make sure unit is completely charged. • Check that all connections are correct and properly plugged in. • Make sure your device is properly paired with the iBT52. • Make sure the Power On/Off Switch switch is not in the OFF (left) position. Resetting the iBT52 If the unit becomes “locked up”... - Page 9 Internal Rechargeable Lithium-ion Battery This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact us for repair information. WARNING/DISPOSAL OF UNIT Please do NOT attempt to change the battery yourself.
-
Page 10: Consumer Product Safety Guide
Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. -
Page 11: Information Fcc
FCC Information FCC ID: EMOIBT52 FCC Radiation Exposure Statement IC: 986B-IBT52 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This Device complies with RSS-102 of the IC Rules;... -
Page 12: Limited 1-Year Warranty
Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.
Need help?
Do you have a question about the iHome iBT52 and is the answer not in the manual?
Questions and answers