Bootup Numlock State; Security Option; Boot Mode Selection - Gigabyte GA-F2A85XM-D3H User Manual

& Hard Drive/CD/DVD ROM Drive/Floppy Drive/Network Device BBS Priorities
Specifies the boot order for a specific device type, such as hard drives, optical drives, floppy disk drives,
and devices that support Boot from LAN function, etc. Press <Enter> on this item to enter the submenu that
presents the devices of the same type that are connected. This item is present only if at least one device
for this type is installed.
& Bootup NumLock State
Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST. (Default:
Enabled)
& Security Option
Specifies whether a password is required every time the system boots, or only when you enter BIOS Setup.
After configuring this item, set the password(s) under the Set Supervisor/User Password item in the BIOS
Main Menu.
A password is only required for entering the BIOS Setup program.
Setup
A password is required for booting the system and for entering the BIOS Setup
System
program. (Default)
& Full Screen LOGO Show
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the
GIGABYTE Logo when the system starts up. (Default: Enabled)
& CSM Support
Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot process.
Enables UEFI CSM. (Default)
Always
Disables UEFI CSM and supports UEFI BIOS boot process only.
Never
& Boot Mode Selection
Allows you to select which type of operating system to boot.
 UEFI and Legacy Allows booting from operating systems that support legacy option ROM or UEFI
option ROM. (Default)
Legacy Only Allows booting from operating systems that only support legacy option ROM.
UEFI Only Allows booting from operating systems that only support UEFI option ROM.
This item is configurable only when CSM Support is set to Always.
& LAN PXE Boot Option ROM
Allows you to decide whether to enable the legacy option ROM for the LAN controller. (Default: Disabled)
This item is configurable only when CSM Support is set to Always.
& Storage Boot Option Control
Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller.
Disables option ROM.
Disabled
Enables legacy option ROM only. (Default)
Legacy Only
UEFI Only Enables UEFI option ROM only.
Enables legacy option ROM first.
Legacy First
UEFI First Enables UEFI option ROM first.
This item is configurable only when CSM Support is set to Always.
- 45 - BIOS Setup