DTVPal TV Converter Box User Manual page 31

Y DTVP
OUR
Symptom
Some of my local
over-the-air
channels are not
available through
my DTVPal.
I have a snowy,
blue, or black
screen.
D
AL IGITAL
1 Your DTVPal is only able to tune digital over-the-air
channels. It is possible that some of the channels you are
missing are channels that are still broadcasting in
analog.
2 You can go to the website www.antennaweb.org to find
out which channels in your area are currently
broadcasting a digital signal. If the channel you are
missing is still in analog, you can view the channel using
the TV's tuner. To view analog channels, press the
ANALOG PASS-THROUGH button on the DTVPal
remote control, then change channels on your TV using
your TV's remote control. When you want to return to
watching digital channels using your DTVPal, change
back to the correct channel (3 or 4) or input, and press
the ANALOG PASS-THROUGH button again.
1 Make sure your DTVPal is powered on. Press POWER
on the DTVPal remote control.
2 Make sure the TV is on the correct channel or video input
to view your DTVPal. If your DTVPal is connected to your
TV using the TV S
on channel 3 or 4. If connected using the A
(RCA-type) connection, the TV needs to be on a video
input or source.
3 Check the connections between your DTVPal and your
TV.
- -A
TO NALOG
Troubleshooting Steps
O connection, the TV needs to be
ET UT
TV C
ONVERTER
T
ROUBLESHOOTING
/V
UDIO
Page 21
IDEO