Direct3D Settings - PNY Quadro FX Series User Manual

Direct3D Settings

The following Direct3D Performance and Compatibility Options are explained so that the user may adjust the settings if
needed to obtain optimal performance.
Enable fog table emulation:
This option is used to turn fog table
emulation on or off. Direct3D specifies that a
display adapter capable of Direct3D
hardware acceleration should be able to
implement either vertex fog or table fog.
Mipmapping:
Allows you to adjust the LOD (Level of
Detail) bias for mipmaps.
PCI Texture Memory Size:
This allows the graphics processor to utilize
up to specified amount of system memory for
texture storage in addition to the memory
installed on the display adapter itself.
Custom Direct3D Settings
A list of the custom settings (or "tweaks" )
you have saved. Selecting an item from the
list will activate the custom setting. To apply
the setting, choose the "OK" or "Apply"
button.
PNY Quadro User Manual Rv. 0619- V.4.0
49
page