Harman Consumer Group HKTS 11 Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

HKTS 11 Home Theater Speaker System

OWNER'S MANUAL

Table of Contents

Need help?

Do you have a question about the HKTS 11 and is the answer not in the manual?

Questions and answers

Summary of Contents for Harman Consumer Group HKTS 11

Page 1 HKTS 11 Home Theater Speaker System OWNER’S MANUAL...
Page 2: Table Of Contents
Speaker-Level Connection Guide Dolby Digital or DTS (or Other Digital Surround Mode) Connection Dolby Pro Logic (Non-Digital) – Line Level We, Harman Consumer Group, Inc. Dolby Pro Logic (Non-Digital) – 2, Route de Tours Speaker Level 72500 Château-du-Loir, 12 Operation...
Page 3: Introduction
Introduction Introduction The HKTS 11 subwoofer is easy to connect to Included your system, since it’s equipped with a special Thank you for purchasing the Harman Kardon subwoofer input for use with equipment that HKTS 11, with which you’re about to begin has a dedicated subwoofer connection that car- many years of listening enjoyment.
Page 4 Rear Panel Connections HKTS 11 or HKTS 11BQ System Subwoofer-Level Control Line-Level Subwoofer (SUB) Input Master Power Switch High-Cut (Low-Pass) Filter Switch Line-Level Full-Range Inputs AC Power Cord Trigger Input Speaker-Level Outputs Phase Switch Speaker-Level Inputs Subwoofer-Level Control: Volume Trigger Input: Some receivers or sound...
Page 5 Rear Panel Connections ever, it does no harm to experiment with the Master Power Switch: Place this switch in Phase Switch , and you may leave it in the the “•” position to power-on the SUB-TS11 position that maximizes bass response. subwoofer.
Page 6: Speaker Placement
Speaker Placement Color-Coding System Center Channel Speaker The HKTS 11 uses the channel color-coding system established by the Consumer Electronics Green Association to make setting up your home theater speaker system as easy as possible. Your 0-0,55 m 1,5-1,85 m...
Page 7: Mounting Options
Mounting Options Wall-Mounting for Satellites The bracket has two openings on top: a round Wall-Mounting for the Center screw hole, and an arc-shaped opening in front Speaker Unscrew the bolt that attaches the black shelf of it. The speaker cable should be threaded stand to the bottom of the speaker.
Page 8: Speaker Connections
CEA standard and therefore use a color other than red or black for the (+) terminal to indicate some speaker positions: e.g., surround left. Although the HKTS 11 system has red and black collars on the individual speaker terminals to denote the positive and negative connections,...
Page 9: Dolby Digital Or Dts (Or Other Digital Surround Mode) Connection
Speaker Connections Dolby Digital or DTS ® jack to the LFE output or subwoofer output Make sure that you have configured your (or Other Digital Surround Mode) on your receiver or amplifier. Connect each surround-sound processor for “Subwoofer On.” Connection speaker to the corresponding speaker terminals The front left, front right, center and rear on your receiver or amplifier.
Page 10: Dolby Pro Logic (Non-Digital) - Line Level
Speaker Connections Dolby Pro Logic (Non-Digital) – Use both the left and right inputs on the sub- If your receiver/processor has a built-in low- Line Level woofer if your receiver or processor has both left pass-crossover filter for the subwoofer output, and right line-level outputs.
Page 11: Dolby Pro Logic (Non-Digital) - Speaker Level
Speaker Connections Dolby* Pro Logic* (Non-Digital) – Connect your receiver or amplifier’s front left Connect your receiver or amplifier’s center, left Speaker Level and right speaker terminals to the left and right and right surround-speaker terminals to the terminals on the subwoofer that are marked corresponding terminals on the back of your Use this installation method for Dolby Pro Logic “High Level In.”...
Page 12: Operation
Operation Move the Master Power switch (marked Volume Additional Bass Adjustments “Power” ) to the “•” (On) position to use the Volume can be adjusted using the Subwoofer In addition to the volume adjustments described subwoofer. The SUB-TS11 subwoofer will auto- Level Control (above), as shown below.
Page 13: Troubleshooting
Troubleshooting If there is no sound from • Check that receiver/amplifier is on and a source is playing. any of the speakers: • Check that the powered subwoofer is plugged in, its Power switch is switched on to the “ON •” position. •...
Page 14: Specifications
Specifications HKTS 11 CEN-TS14 SUB-TS11 System Center Subwoofer Frequency Response Recommended Power Amplifier 35Hz – 20kHz (–6dB) 10 – 120 Watts 200 Watts RMS Impedance Bass 8 Ohms nominal 10" Woofer, bass-reflex enclosure SAT-TS14 Sensitivity Dimensions (H x W x D)
Page 16 250 Crossways Park Drive, Woodbury, New York 11797 www.harmankardon.com Harman Consumer Group, Inc.: 2, Route de Tours, 72500 Château-du-Loir, France © 2007 Harman Kardon, Incorporated Part 406-000-01010...