Table of Contents
Advertisement
INSTALLATION AND SETUP
This section will guide you through the installation and
setup process for QuickLink Mobile. Before getting started,
you should become familiar with the documentation that
came with your wireless device.
CD'S
You purchased a UM175US, there is only one CD that con-
tains QuickLink Mobile and USB modem drivers.
Important: If using a USB device, QuickLink Mobile software
@
must be installed before you insert the USB device in to the
computer for the first time. Only after the software has been
installed can Windows successfully install and configure the
USB device.
GETTING STARTED (WIN)
Follow these steps to install QuickLink Mobile:
1 Turn on your computer and close all applications.
2 Insert the CD into your CD-ROM drive.
3 If set up does not automatically start, click the Start but-
ton on the taskbar and choose Run. Type D:\Start (where
D is the letter of your CD-ROM drive) and click OK.
4 Follow the steps in the next section.
GETTING STARTED (MAC)
Follow these steps to install QuickLink Mobile:
1 Turn on your computer and close all applications.
2 Insert the CD into your CD-ROM drive.
3 Find and double click on the drive icon that represents
the data card.
10
10
GETTING STARTED
Advertisement
Table of Contents
