Defender Security 15-SD102 User Manual

2-CH HD-SDI DISTRIBUTION AMPLIFIER USER MANUAL
MODEL: 15-SD102
1. Key Features
Supports high-definition HD-SDI digital video at 720p60, 1080i60 and 1080p30
formats at all frame rates.
Supports HD-SDI signals at data rates up to 3G-SDI video.
Passes embedded audio, ancillary ID, and metadata information.
Automatic input equalization improves signal transmission distances.
Automatically adapts to SMPTE and ITU digital video standard formats.
2. Panel View
① . DC+12V INPUT
② . POWER ON and HD-SDI SIGNAL LOCKED LEDs
③ . HD-SDI INPUT
④ . HD-SDI OUTPUT
3. Caution for Installation
3.1 Be careful, never let any water in this equipment.
3.2 If necessary, use a soft cloth moistened with alcohol to wipe off the dust.
3.3 Be extra careful not to shake the unit.
3.4 Avoid places where temperatures exceed 55°C or higher.
3.5 Avoid places where there are frequent vibrations or shocks. When any abnormalities occur, make sure to
unplug the unit and contact your local dealer.
4. Cable Installation
4.1
The coaxial cable is not squeezed at any position and the maximum bending radius defined by the cable
manufacturer should be considered.
4.2 Bending creates pressure on the center conductor, causing it to move through the dielectric toward the
inside of the bend. It would be caused to the impedance matching and return loss (signal reflection)
problems, then reduces the maximum possible cable length and signal quality and reliability.
4.3 Avoid any BNC - adapter or any connectors in the BNC cable. Looping HD-SDI signals by BNC
T-connectors to other devices is not possible.
5. Packing
5.1 Distribution Amplifier
5.2 User manual
5.3 Screws
5.4 Plastic-Conical-Anchor
5.5 Power Adaptor
○ ○ ○
1 2 3
×1
×1
×4
×4
×1 [Option]
○
4