How To Associate A Router With Your Linksys Smart Wi-Fi Account - Linksys AC1750 User Manual

Linksys EA-Series
4. Select your ISP's Internet connection type from the drop-down list
Complete the Optional Settings only if required by your ISP
TIP
For field descriptions, click Help at the top of the screen
5. Click OK
IPv6 Internet connection settings
IPv6 is a new IP protocol that uses simplified packet headers and requires IPSec
It also has improved support for mobile IP and computing devices
NOTE
To use your router's IPv6 Internet connection settings, IPv6 service
from your ISP (Internet service provider) is required For more
information on this service, ask your ISP
To manually configure your router's IPv6 settings:
1. Use an Ethernet cable to connect an Ethernet port on your router to the
Ethernet port on your computer
2. Log into Linksys Smart Wi-Fi (See "How to connect to Linksys Smart Wi-
Fi" on page 7
3. Under Router Settings, click Connectivity The Connectivity page opens
4. Click the Internet Settings tab, then click IPV6
5. Click Edit You can now change the following settings:
IPv6 - Automatic—Select Enabled to use IPv6 for all network
•
addressing
DUID (device user ID)—Used by DHCP to identify network clients
•
6rd Tunnel—Allows your router to send IPv6 IP addresses over IPv4
•
networks To enable this option, IPv6 - Automatic must be unselected
To let your router handle the 6rd Tunnel settings (such as prefixes and
address masks), change the 6rd tunnel setting to Automatic Select
Manual to change these settings manually
Prefix—Enter the prefix address used for the tunnel provided by your
•
ISP
Prefix Length—Enter the prefix length used for the tunnel provided
•
by your ISP
Border Relay—Enter the border relay address used for the tunnel
•
provided by your ISP
IPv4 mask length—Enter the IPv4 address mask length used for the
•
tunnel provided by your ISP
6. Click OK
How to associate a router with your
Linksys Smart Wi-Fi account
To associate an additional router to your Linksys Smart Wi-Fi account:
1. Run Setup for the additional router When Setup is complete, you are
prompted to create a new Linksys Smart Wi-Fi account
2. Instead of creating a new account, click Login at the top of the screen
You are prompted to enter your account user name (e-mail address) and
password
3. Enter your original Linksys Smart Wi-Fi account user name and password,
then click Log in The additional router is added to your Linksys Smart
Wi-Fi account
4. To configure the additional router, log into Linksys Smart Wi-Fi, then
select the router's SSID (network name) from the drop-down list at the
top of the screen
Setting Up: Advanced
25