14
TV Menus
<t)
Adjust
continued
Picture
Audio
Reset
Global PlCture+
....
......
Adjust
rn
1111-:-
~
@)
~
Subwoofer option is available if
a
subwoofer con-
nection has been identified on the SUBWOOFER
OUTPUT jack.
Speaker option is available if a sub woofer connec-
tion has not been detected.
TV:
Turns on the internal TV speakers.
If an AN receiver or headphone connection has been
detected, available options are:
Subwoofer Off, On:
Use Off to turn off audio to a connected sub-
woofer or to reset the AVR AUDIO OUTPUT jack.
Level Adjustment:
To adjust the subwoofer volume level, highlight
Subwoofer and press ENTER to display an adjust-
ment slider.
AN
Receiver:
Head-
phones:
Audio available from an AN Receiver.
(Headphone option not available.)
•
Audio available from headphones.
•
Connect to AVR AUDIO OUTPUT jack.
Surround:
Stereo,"-:
--.:N-"o=sp"'e'-'c::.:ia"'l-"a"'u"-d:.::ioc..:e"-ff:.::e:.::c~ts'_'fc:.:ro"_m:..:...::thc.::e::...T-'-V.:....::sr:.e"'a"'k:.::e=rs.
Modifies audio from the TV speakers.
Sound Mode
Music
Night
153 and 249 series
•
The left and right sound beams are output directly toward the
listening position.
•
The Balance setting is unavailable, defaults to center
153 and 249 series
•
Focuses all 16 speakers to the center channel to allow sound to
focus only at one point, thus ensuring quiet outside the room.
•
A range of 35 degrees from center in both directions is supported.
•
Subwoofer is muted if present.
•
The Balance setting is unavailable, defaults to center
•
Press the ENTER key to display a slider, default center (relative
center), to move the focused sound to a specific seated location.
Listen To
Language
Available for analog channels from ANT only.
Mono:
Reduces background noise.
Stereo:
The TV plays stereo in stereo and mono broadcsts in mono.
SAP (Second
Selects an additional sound track not audible during normal TV
Audio Program):
viewing.
Selects the current language for a digital program from ANT.
Level Sound
On, Off:
Reduces differences in sound volume between programming segments,
such as between regular broadcast programs and commercials.
Resets audio and picture adjustments for the current
input. Highlight the Reset icon and press ENTER.