Related Manuals for AMI MUSIK DDH-1
Summary of Contents for AMI MUSIK DDH-1
- Page 1 Headphone Amp MUSIK DDH- Owner’s manual AMI International, Inc. DDH-1 Owner’s manual...
- Page 2 AMI International, Inc. In no event will AMI International, Inc. be liable for direct, indirect, special, exemplary, incidental, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages.
-
Page 3: Package Contents
1. Package Contents < 2.5ps timing (period) jitter to achieve the highest clear sound. 44.1 kHz (and multiples, 22.5792MHz ±1.0ppm Please make sure you have all of the following contents: TCXO) and 48 kHz (and multiples, 24.576MHz ±1.0ppm TCXO). • USB audio class 2 (up to 24-bit /192kHz) and high- (1) 12V 2A AC-DC Adaptor: 1 pc (2) USB A male - USB B male cable: 1pc speed asynchronous mode: Microsoft Windows®... -
Page 4: Main Components
FIX/ VAR reference clock), 44.1 kHz (and multiples, 22.5792MHz ±1.0ppm select slide switch TCXO) and 48 kHz (and multiples, 24.576MHz ±1.0ppm TCXO) • Line input : Analog input support line output, headphone AMI International, Inc. - Page 5 (1) Microsoft Windows 7 / Windows Vista installation You have to install the driver before using the AMI MUSIK DDH-1 device for the first time! Put the installation CD into the CD/DVD drive of your computer.
- Page 6 If Windows Security warning appears, please select Install this Complete the installation by clicking Finish. driver software anyway AMI International, Inc.
- Page 7 (2) Windows 7 system setup Select AMI DDH-1 USB HD-Audio 24/192 Audio as playback device and set it as default by clicking Set Default. After successful installation of the driver, click on Start → Control Panel. You can adjust sample rate in the Hardware and Sound category.
- Page 8 Windows 7. If you want to playback these sample rates, your music player must support sample rate selection feature. Select AMI DDH-1 USB HD-Audio 24/192 Audio as playback device and set it as default by clicking Set Default.
- Page 9 Click Properties button and then select Advanced tab and you can (4) Windows XP installation adjust the output format as required. You have to install the driver before using the DDH-1 device for the first time! Put the installation CD into the CD/DVD drive of your computer. Open the explorer and click on the icon of your CD/DVD drive.
- Page 10 After installation of the driver package, Windows automatically starts Found New Hardware Wizard. Click on No, not this time and Click Next to continue. AMI International, Inc.
- Page 11 (5) Windows XP system setup After successful installation of the driver, Click on Start → Control Panel. Double Click and Open Sounds and Audio Devices. Sounds and Audio Devices Properties window will appear. DDH-1 Owner’s manual...
- Page 12 (6) Apple Mac OS X installation Select device AMI USB 2.0 Audio Out The OS embedded UAC2 driver will be installed automatically when USB-device is connected. No third party driver is needed. (7) Apple Mac OS X setup Open Finder → Go to Utilities Click conf iguration and set Use this device for sound output.
-
Page 13: Specifications
• Warranty http://amimuse.com/support/warranty/ • FAQ http://amimuse.com/support/faq/ • Manual & Driver updates http://amimuse.com/support/downloads/ AMI, AMI International, Inc. logos are trademarks of AMI International, Inc. All other trademarks, logos are trademarks or registered trademarks of their respective owners. DDH-1 Owner’s manual...
Need help?
Do you have a question about the MUSIK DDH-1 and is the answer not in the manual?
Questions and answers