CHIEF Safe-Keeper Instruction Manual

Safe-keeper security device

Advertisement

Quick Links

I N S T R U C T I O N
Safe-Keeper
Congratulations on the purchase of your Safe-Keeper
security device from Chief Manufacturing and thank you
for your confidence in our product.
Your Safe-Keeper is designed to give you serious protec-
tion for the security of your projector, display, or presenta-
tion equipment. To obtain the best results from your
investment, please read this manual and acquaint your-
self with your new purchase before applying this security
device. This will save you time and minimize the chance
of inadvertent activation of the device.
You will need this manual for operating and maintenance
procedures. We suggest that you keep this manual, with
your combination, in a safe place for future reference.
We suggest you
write your combination here:
for quick reference
BEFORE YOU BEGIN
• WARNING: Hold security cable during retraction into Safe-Keeper to prevent uncontrolled motion. Uncon-
trolled motion of the cable may cause personal injury.
• WARNING: Loud alarm (110 db), do not hold the Safe-Keeper close to ears when activated.
• CAUTION: You must fully depress the Green Trigger Button while opening or closing the battery compartment.
• CAUTION: To maintain security of your Safe-Keeper, rotate the dials on the lock to random numbers after every
activation or when not in use.
• NOTE: In some buildings, normal architectural movement may be sufficient to trigger the motion detector. In
these cases, or for use in areas where earthquakes are common, we recommend use of the "cable continuity only"
mode and the Projector Slot Attachment Adapter (see Page 10).
• NOTE: Battery life expectancy is approximately 6 months. Frequent activation and testing diminish battery life
expectancy. To maintain security, check/replace batteries every 3 to 6 months or when Safe-Keeper indicates low
battery (see Page 3).
• If you have any questions about these instructions, contact Chief Manufacturing at 1-800-582-6480.
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
LOGO
12800 HIGHWAY 13 SOUTH, SUITE 500
SAVAGE, MINNESOTA 55378 USA
M A N U A L
PART NO. 8830-000001 (Rev. D)
2000 Chief Manufacturing
Printed in USA 07-15
www.chiefmfg.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Safe-Keeper and is the answer not in the manual?

Questions and answers

Summary of Contents for CHIEF Safe-Keeper

  • Page 1 • CAUTION: You must fully depress the Green Trigger Button while opening or closing the battery compartment. • CAUTION: To maintain security of your Safe-Keeper, rotate the dials on the lock to random numbers after every activation or when not in use.
  • Page 2: Table Of Contents

    CAUTION:A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the correspond- ing instructions. • CAUTION: To maintain the security of your Safe-Keeper, treat you combination like any PIN. Record your combination and store it in a safe place, separate from Safe-Keeper. •...
  • Page 3: Getting Started

    Safe-Keeper GETTING STARTED Before putting your Safe-Keeper into service, you must become familiar with five features of your Safe-Keeper. These five fea- tures include: battery care, combination lock operation, retractable cable function and operation, activation of your Safe-Keeper, and the variety of uses for your Safe-Keeper.
  • Page 4: Battery

    When battery power is nearly depleted, the Safe-Keeper LED indicator will glow red and the Safe-Keeper will, one time only, emit five steady beeps. If the LED indicator is glowing red, replace the battery...
  • Page 5: Combination Lock

    Safe-Keeper 2. COMBINATION LOCK The original factory preset combination is 0-0-0. The combination lock activates three components of the Safe-Keeper: * Locks the retractable cable in place, activating the Safe-Keeper. * Locks the battery compartment, preventing unauthorized de-arming of the Safe-Keeper.
  • Page 6: Retractable Cable

    * Secures the Safe-Keeper to any device for security during transportation or storage. A. Operation The retractable cable only works when the Safe-Keeper is unlocked and the Green Trigger button is held down. Operate the retract- able cable by preforming the following: Set the Number Dials to your personal combination.
  • Page 7: Activating Motion Sensor Alarm

    Whether mounted or portable, you can choose from three security levels to meet your needs. Security levels can be reset only in diminishing levels (1 to 3). The LED indicator on the Safe-Keeper indicates the level of security you have chosen.
  • Page 8: Set Level 2 Security

    Eight seconds of continuous motion (e.g. movement, jarring, or vibration) and/or cable-tampering causes the Safe-Keeper to sound. If eight seconds of continuous motion is detected, the Safe-Keeper chirps a warning sound and the LED indicator shines red for three seconds. Next, the alarm sounds for 45 seconds or until deactivated. After 45 seconds, the alarm automatically resets and it will sound again repeatedly at 45-second intervals until it is deactivated or the battery is exhausted.
  • Page 9: Multiple, Flexible Uses Of Your Safe-Keeper

    * Use the Attachment Plate to secure your Safe-Keeper to a stationary location and tether your projector/display. 1. CABLE TETHER USING THE CHIEF SA-1 SECURITY ANCHOR The Chief Security Anchor allows you to use the NPT pipe or other architectural components as a secure anchor point for the self- contained cable. Please follow these instructions carefully: Follow the instructions for adhering the Safe Keeper docking station to your Projector or Display.
  • Page 10: Cable Tether For Mobile Applications

    When using the cable to tether for mobile application, make sure the tether can’t be easily removed without disarming the Safe- Keeper. We suggest arming the Safe-Keeper at Level 1 or Level 2 whenever possible (item is stationary). 3. ATTACHMENT PLATE The Attachment Plate (see Figure 8) is designed to be attached directly to a projector/display or to a stationary surface from which you can tether your projector/display.
  • Page 11: Projector Slot Attachment Adapter

    Safe-Keeper Insert Cable Head into Locking Hole to activate Safe-Keeper (see Activating Motion Sensor Alarm). To remove Safe-Keeper from Mounting Plate, press and hold Green Trigger button and slide Safe-Keeper off. 4. PROJECTOR SLOT ATTACHMENT ADAPTER The Projector Slot Attachment Adapter (see Figure 9) is designed to be attached directly into a projector/display designed with a Projector Slot Attachment Adapter slot (Kensington Lock), usually found on the side or back of the projector (see Figure 10).

Table of Contents