Connecting; Pairing - Brookstone Connect User Manual

connecTinG

1 . Connect one end of the included 3 . 5 mm AUDIO CABLE to the 3 . 5 mm
PORT of the Bluetooth
2 . Connect the other end to an audio input (AUX In) on your home stereo
system . Consult your stereo system's manual for more information .
3 . Connect the MICRO USB POWER CABLE (included) to the Bluetooth
Connect's MICRO USB PORT, and then plug the MICRO USB POWER
CABLE into an electrical outlet .

pairinG

1 . Press and hold the MULTI-FUNCTION button . The blue LED light will flash
in approximately 7 seconds, followed by the LED alternating between blue
and red to indicate it is ready to sync with your device .
2 . Go to the Bluetooth
select "Connect to Brookstone . "
3 . If prompted, enter the PIN code "0000 . " This will allow your device to pair
with the Bluetooth
4 . Your Bluetooth
the audio on your device as you normally would and the sound will come
out of your stereo speakers!
5
Connect .
®
Manager of your device . Search under Devices and
®
Connect .
®
Connect is now synced and ready to play audio . Just play
®
®