Table of Contents
Advertisement
•
The VOLTAGE SELECTOR is the recessed switch which is used to set
the unit to either 100-127V or 220-240V electrical voltage standards .
By default the Voltage Selector is set to 100-127V .
•
The STANDS are the two supports located at the rear of the main body .
The Stands are designed to support the unit in an upright position when
the Ironing Plate is hot .
•
The MEASURING CUP is designed to help you easily and consistently
fill the Water Tank with the optimum amount of water .
operaTion
ProPer griP
Main body surface can get hot . Grip the Steam Bug™ using the HAND GRIP only .
note: Use care when ironing. shut power off and unplug iron after
each use.
setting voltage
Steam Bug™ is dual-voltage, which allows it to function correctly in regions with
either 100-127V or 220-240V electrical voltage standards . Voltage is set using
the VOLTAGE SELECTOR .
imPortant: By default, the voltage seleCtor is set to 100-127v.
Be sure to select the correct voltage for your location before plugging the
PoWer Cord into an electrical outlet.
5
Advertisement
Table of Contents
