1 Introduction The Nexus NSR4 is a 4-source media hub. It was designed for use in a range of applications from boardrooms to classrooms and anywhere else where selection among multiple audio/video sources is required to interface to a single VGA capable display unit.
The NSRK also includes an IR detector for the LR15 remote control. NSRK Keypad Layout 1.4 LR15 Remote Control Operation of the NSR4 by the LR15 IR Remote Control is the same as by the NSRK Keypad. LR15 Remote Control...
2 NSR4 Operation 2.1 Source Selection With no source selected, the NSR4 will be in standby mode – indicated by the front panel red Standby LED being lit. Pressing any of the four source select buttons on the NSR4 will select the corresponding source (audio and video) connected to the rear of the NSR4.
Before commencing installation, please read the Important Safety Information provided at the back of this document. Installation of the NSR4 is simply a matter of mounting the unit into the equipment rack and connecting the appropriate input and output cables.
1A / 240Vac Power Connector 3-pin IEC socket Mounting Clearances 1RU above and below appliance Dimensions (W x D x H) 426 x 45 x 185 (w x h x d) Weight Nexus 4-Source Audio/Video Hub Model NSR4 Page 5...
Page 9
EARTH CONNECTION. MAINS LEADS This appliance is supplied with a non-rewireable mains lead. Replacement mains leads can be obtained from Nexus Technologies Pty Ltd. General Safety Instructions 1. Read instructions. Read the safety and operating instructions before operating the appliance.
Need help?
Do you have a question about the NSR4 and is the answer not in the manual?
Questions and answers