Nokia MD-50W User Manual page 3

2 Volume keys
3 Bluetooth status indicator
4 Bluetooth key
5 Battery status indicator
6 Charger connector
7 Power key
8 Battery cover fixing screw
9 3.5 mm audio input connector
Charge the battery
Before using the speaker, you must charge the battery.
When the battery level of the speaker is low, the battery indicator light flashes. When
the battery is charging, the light stays on. After the battery has fully charged, the light
switches off.
1 Connect the charger to a wall outlet.
2 Connect the charger cable to the charger connector on the speaker.
3 When the battery is fully charged, first disconnect the charger from the speaker,
then from the wall outlet.
You can also use a compatible USB cable to charge the battery. Charging over USB can
take longer to start and you may not be able to use the speaker immediately. Charging
may not work if you connect through a non-powered USB hub. Your speaker charges
more quickly when connected to a wall outlet.
You can only use the USB connection to charge the battery.
Your speaker has an internal, removable battery. To remove the battery, unscrew the
battery cover, and gently remove the cover and the battery.
Switch the speaker on
Press and hold the power key.
If you have never paired the speaker with a device, or you have cleared the pairings,
pairing mode is activated automatically, and the Bluetooth status indicator starts to
flash slowly.
If you already have paired the speaker with one or more devices, the speaker connects
to the last device it was used with. If the speaker can't connect to the last used device,
it connects to the next device on the paired devices list.
3