Setup Overview
Setup Overview
Step
Step
1 1
Charge Phone:
Charge Phone:
Follow the instructions in this
Follow the instructions in this
Guide to install the battery
Guide to install the battery
and charge your Phone.
and charge your Phone.
Step
Step
2 2
Set Up Phone:
Set Up Phone:
Follow the on-screen instructions
Follow the on-screen instructions
to connect to an access point and
to connect to an access point and
sign on to Skype.
sign on to Skype.
Step
Step
3 3
Make a Call:
Make a Call:
Use the on-screen menu to
Use the on-screen menu to
make a Skype or SkypeOut
make a Skype or SkypeOut
™ ™
Quick Start Guide
�����
�������
��������������
�������������
��������
call.
call.
2.2
2.4
Wi-Fi
Step 1 - Charge Phone
1.1
Remove the cover on the back of the Phone. Insert the battery and
replace the cover.
1.2
Connect the battery charger to the Phone's power port (
at the bottom of the Phone. For fi rst-time use, allow three hours to fully
charge the battery.
����������
Step 2 - Set Up Phone
2.1
To power on the Phone, push and hold "End/Power" (
than two seconds.
��������������
2.2
Select the language of the display by pushing the left soft key (
�������������
2.3
Read the Skype Agreement statement and push the left soft key (
to accept the terms. You must accept the Agreement to use the Phone.
2.4
The Phone will now search for nearby access points and list those that
it fi nds. Choose a wireless network from the available networks listed
by toggling the navigation key (
(
) to access the "Options" menu.
2.5
Select "Connect" from the "Options" menu by pressing the left soft key
2.3
(
). The Phone will prompt for an encryption key if the network is
secured. If this is the case, you must enter a valid key in order to access
the network.
2.5
Phone
®
for Skype
™
) and pressing the left soft key
) located
) for more
).
)