Synchronizing your pocket pc over bluetooth for hp ipaq pocket pc models: h1940, h1945, h2210, h2215, h5450, h5455, h5550, h5555 also works with other pocket pcs using widcomm btce ver.1.3.x (14 pages)
Page 1
Bluetooth ™ USB Adapter Connect your peripherals and computing devices, without cables Quick Installation Quide F8T008 - F8T009...
Page 2
Introduction PC System Requirements • PC-compatible computer, CPU speed of 200MHz or above • Memory: 64MB or above, 128MB recommended • One available USB port, USB 1.1 standard • Windows ® 98 SE, Me, 2000, and XP Mac ® System Requirements •...
The installation process for Windows XP may look slightly different from to continue. the software in the default directory Windows 98 SE, Me, and 2000. “C:\Program Files\belkin\Bluetooth\ Software\”. Click on “Next” to continue. Note: Do not insert the USB Adapter into the USB port prior to software installation.
Page 4
During the installation process you may be prompted to insert your USB Adapter. is ready to be installed and click install the Belkin Bluetooth Software. If your USB Adapter is not plugged into your computer at this time, you may insert on “Install”.
Step 1: Software Setup Step 2: Hardware Setup Hardware Setup for Windows 98 SE, Me, 2000, and XP Confirm the completion of the software installation; click “Finish” and restart the system if prompted to do so. Follow these instructions to install your USB Adapter on your PC. Note: Your USB Adapter is sensitive to static electricity, which can damage its delicate electrical components.
Page 6
Browse for the location of the device If you receive the following “Hardware A window will appear that confirms the completion of the hardware installation; driver “:\Program Files\Belkin\ installation notice”, click on “Continue click on “Finish” to complete the installation process.
Step 3: Uninstalling the Software Uninstalling the Software for Windows 98 SE, Me, 2000, and XP Follow these instructions to uninstall your USB Adapter on your PC. Insert the CD-ROM included with your USB Adapter. This “InstallShield Wizard” should automatically load. If it does not load, explore the CD and run the “Setup.exe”...