Summary of Contents for Naxa NT-50
- Page 1 Digital Television Converter Box MODEL NO.: NT-50 Instruction Manual BEFORE USING THIS PRODUCT, READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS. Save this booklet for future reference.
-
Page 2: Getting Started: Important Instruction
IMPORTANT INSTRUCTIONS SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. USE THE RECOMMENDEDACCESSORIES ONLY. REFER SERVICING TOQUALIFIED SERVICE PERSONNEL. The graphic symbols on the back cover of the set mean the following: The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage. -
Page 3: Features
PRECAUTIONS - TO PROLONGUSE TIME, PLEASE MAKE SURE THE INTERVAL OF SWITCHING ON AND OFF IS NOT LESS THAN 5 SECONDS. - PROTECT THE POWER CORD FROM BEING WALKED ON OR PINCHED, PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT THE PRODUCT. USE OF POWER - DO NOT CONNECT TO POWER OVER PRESCRIPTIVE VOLTAGE, USE THE CORRECT VOLTAGE AND CURRENT MARKED ON THE... -
Page 4: Accessories
ACCESSORIES... -
Page 5: Table Of Contents
TABLE OF CONTENTS GETTING STARTED: IMPORTANT INSTRUCTION............FEATURES..................ACCESSORIES................GENERAL PARTS AND CONTROLS..........MAIN UNIT..................REMOTE CONTROL............... BASIC CONNECTION..............REMOTE CONTROL PREPARATION..........OPERATIONS: BASIC OPERATIONS..............9-10 MAIN MENU..................10-15 FOR REFERENCE: SPECIFICATIONS................MAINTENANCE................GENERAL TROUBLESHOOTING.......... -
Page 6: General Parts And Controls
GENERAL PARTS AND CONTROLS MAIN UNIT FRONT VIEW 1. STANDBY button - To set the unit in 6. Remote control sensor standby mode. 7. VOL-/ button - To decrease the 2. Standby indicator - To set the unit in volume level or move left. standby mode;... -
Page 7: Remote Control
Remote control 1. MUTE button: To mute the sound. 2. NUMERRIC buttons: To input the numeric information, such as channel number and so on. 3. -/-- button: Two digital program button. 4. CC button: To set the caption mode. 5. EPG button: Display the program information of current day or latter days. -
Page 8: Basic Connection
BASIC CONNECTION Ensure all the cables are disconnected from the main unit before connecting to AC power source by AC power adaptor. Read through the instructions before connecting other equipment. 1.CONNECTING TO AC POWER SOURCE 2.CONNECT EXTERNAL ANTENNA TO UNIT Install external antenna into antenna jack for best picture. -
Page 9: Remote Control Preparation
REMOTE CONTROL PREPARATION BATTERY INSTALLATION Install the battery as the follow picture. Be sure negative and positive terminals are positioned as indicated in the battery compartment. (Fig1 ) SERVICE LIFE OF BATTERY -The battery normally last for about one year although this depends on how often, and for how often the remote control is used. -
Page 10: Basic Operations
BASIC OPERATIONS MAKE SURE ALL THE EQUIPMENTS AND AC ADAPTOR ARE CONNECTED PROPERLY AND THE UNIT IS SET IN CORRECT MODE BEFORE KINDS OF OPERATIONS. TURN ON THE UNIT Press STANDBY button of the unit to turn on the unit (The power indicator will display green color). -
Page 11: Main Menu
It is used to set the caption mode. -Keep pressing CC button to select different mode as desired. -Option: On/Off INFO (INFORMATION) It is used to display current program information. -Press INFO button, the screen will display as below: EPG (Electronic program guide) When viewing a digital channel, press the EPG button to access the program guide supplied by the signal provider (not available in all areas). -
Page 12: Auto Search
1. AUTO SEARCH 1.1 SOURCE TYPE - It is used to set the source type. -Press up or down button to select it and then press left or right button to set. -Options: Antenna/Cable. 1.2 START SEARCH - Before normal watching you must search effective channel first. -Press up or down button to select it and press RIGHT button to get in scanning setup page. - Page 13 3. CC SETUP 3.1 CC DISPLAY -Press up or down button to select it and press left or right button to set the cc display ON or OFF. 3.2 608CC TYPE -Press up or down button to select this item, and press left or right button to change the cc type .
- Page 14 5. PROGRAM CONTROL -Press up or down button to select this item. -Press ENTER button to enter the PROGRAM CONTROL menu, then the screen will display the following picture. - There need input password "0000" in order for the child not to change any settings. - If password is invalid, input numbers are cleared and you could input password again;...
-
Page 15: System Setup
Canada French: G-18ans+: - Press left/right button to switch the check box between view and block. - Press up/down button: select previous item or next item. Note: Blocking a rating affects all the higher ratings, so that blocking 13 ans+ in the example above automatically blocks 16 ans+ and 18 ans+, whatever previous state of these ratings was. -
Page 16: Specifications
Specifications 1. Input Resistance : 75Ω 2. Power Consumption: ≤9.6W 3. Standby Power Consumption: ≤0.5W 4. Power Source: AC adaptor or car adaptor（normal: DC 12V 0.8A) 5. Measurement: 205(L)X130(W)X40(D)mm 6. Weight: Approx.500g 7. Connection terminals: 1. Antenna Jack 2. AV Jack 3. -
Page 17: General Troubleshooting
GENERAL TROUBLESHOOTING Check the following points before assuming malfunctions of the TV set: Phenomenon Reasons No picture & sound Improper connection of AC adaptor. TV reception channel is not right and try to reset the unit. Or relocate the No picture TV antenna to the place where reception is better.