Musical Fidelity A3.2 Instructions For Use Manual
Musical Fidelity A3.2 Instructions For Use Manual

Musical Fidelity A3.2 Instructions For Use Manual

Fm tuner with rds and remote control

Advertisement

Quick Links

A3.2 TUNER
FM Tuner with RDS and Remote Control
MUSICAL FIDELITY A3.2 RDS TUNER
POWER
STORE
MODE
TUNE
MONO/STEREO
INSTRUCTIONS FOR USE
Thank you for purchasing the Musical Fidelity A3.2 FM Tuner.
The A3.2 Tuner uses the latest Radio Data System (RDS) circuitry allowing
station identification to be displayed from RDS-supported transmitters.
Special noise-reduction techniques are used to achieve an excellent
technical specification and unparalled sound quality.
Æsthetically, the A3.2 Tuner is a perfect match for the
A3.2 CD player, A3.2
Pre-amplifier or A3.2 Integrated amplifier.
CR
Together these components form one of the finest hi-fi systems available.
Dust regularly with a soft duster or soft brush, but be careful when using
cleaning or polishing agents - they may harm the surface finish.
If you have any questions about your audio system,
please consult your dealer who is there to help and advise.
Issue 1: March 2002
A3.2 Tuner
Instructions for Use Page 1 of 9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A3.2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Musical Fidelity A3.2

  • Page 1 INSTRUCTIONS FOR USE Thank you for purchasing the Musical Fidelity A3.2 FM Tuner. The A3.2 Tuner uses the latest Radio Data System (RDS) circuitry allowing station identification to be displayed from RDS-supported transmitters. Special noise-reduction techniques are used to achieve an excellent technical specification and unparalled sound quality.
  • Page 2: Safety Information

    If connecting to a BS1363 plug, a 13 amp fuse must be used. WARNING: ANY MODIFICATIONS TO THIS PRODUCT NOT EXPRESSLY APPROVED BY MUSICAL FIDELITY WHO IS THE PARTY RESPONSIBLE FOR STANDARDS COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THIS EQUIPMENT.
  • Page 3: General Advice

    Heed all warnings shown on the back of the product. Only connect the A3.2 Tuner to a mains outlet having the same voltage as marked at the back of the unit.
  • Page 4: Installation

    AUDIO OUTPUT sockets on the rear reception conditions - at Musical Fidelity panel of the A3.2 Tuner to the “tuner” or we understand that many audiophiles do “auxilliary” input sockets on the amplifier.
  • Page 5: Facilities And Connections

    RIGHT AUDIO LEFT AUDIO OUTPUT OUTPUT THIS APPLIANCE MUST BE EARTHED POWER CONSUMPTION 10W MANUFACTURED BY MUSICAL FIDELITY LTD, 15-17 OLYMPIC TRADING ESTATE SERIAL FULTON ROAD, WEMBLEY, MIDDLESEX, HA9 0TF, ENGLAND 50/60Hz IMPORTANT NUMBER Issue 1: March 2002 A3.2 Tuner...
  • Page 6: Operation

    Note: Whenever the power is turned ON, the station you were previously receiving Note: Stations found by the A3.2 Tuner will be selected automatically. The during search tuning will depend on the frequency of the station appears in the dis-...
  • Page 7: Further Features

    If mono operation is required, then weaker stations when tuning. press this button once. The indicator will turn off, and your A3.2 Tuner is now in DX, meaning distant reception, is used MONO mode. To return to STEREO when weaker stations are required.
  • Page 8 Batteries are running out Change batteries - do not greatly reduced mix old and new ones. If none of the above actions effect a cure, please contact your dealer or Musical Fidelity service agent. Issue 1: March 2002 A3.2 Tuner...
  • Page 9: Specifications

    Remote control handset (universal type), 2 batteries (type SUM-4, AAA, LR03) IEC mains lead 75 Ohm coaxial aerial (antenna) connector Musical Fidelity reserves the right to make improvements which may result in specification or feature changes without notice. Issue 1: March 2002 A3.2 Tuner...

Table of Contents