Table of Contents
Advertisement
Electrical Connection
Any electrical work required to install this
appliance should be carried out by a
qualified electrician or competent person.
This appliance must be earthed.
The manufacturer declines any liability should
these safety measures not be observed.
Electrical Requirements
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance
rating plate.
The appliance is supplied with a 13amp plug fitted. In
the event of having to change the fuse in the plug
supplied, a 13amp ASTA approved (BS1362) fuse
must be used.Should the plug need to be replaced for
any reason. The wires in the mains lead are coloured
in accordance with the following code:
Green and Yellow: Earth
Blue:
Brown:
The wire coloured green and yellow must be
connected to the terminal marked with the letter "E" or
by the earth symbol
yellow.
The wire coloured blue must be connected to the
terminal "N" or coloured black.
The wire coloured brown must be connected to the
terminal marked "L" or coloured red.
Upon completion there must be no cut, or stray
strands of wire present and the cord clamp must be
secure over the outer sheath.
Neutral
Live
or coloured green and
15
Advertisement
Table of Contents
