Advertisement
PARTS:
A
threshold
B
left fence panel/door
C
right fence panel
D
left front support
E
right front support
F
right rear base
G
left rear base
H
fabric dome with rods
I
3 balls
J
circle
K
square
L
triangle
M
2 links
N
phone
O
fish rattle
P
spider teether
Q
monkey rattle
R
mailbox shape sorter (2
pieces) with 3 fit-in shapes
S
12 washer head screws
ASSEMBLY:
NOTE:
You will need a Phillips/cross head screwdriver (not included) for proper assembly.
STEP 1:
Slide the threshold into the left fence panel/
door as shown. Attach the right fence panel to the
other side of the threshold as shown.
NOTE:
You will hear a "snap" when these
pieces are properly connected.
STEP 2:
Place the left front support under the left
fence panel/door. Gently press fit left fence panel/
door down onto left front support as shown. Repeat
step for right front support and right fence panel.
A
B
C
D
E
F
G
H
I
J
K
L
N
O
P
STEP 3:
Turn the unit over and
secure the left and right front
supports and threshold by inserting
washer head screws in each screw
point as shown. Turn unit right-side
up once screws are inserted.
bottom rod
top rod
STEP 4:
Lie the fabric dome out flat as shown. Lift
the top of the fabric dome up and connect all 4 built-in
support rods by inserting the top rod into the bottom
rod as shown.
NOTE:
Rods are made to flex for increased
ease of assembly. You may need to slide the
fabric up on the rods to assemble posts.
M
R
Q
S
Advertisement
