Subscribe to Our Youtube Channel
Summary of Contents for L2 Audio WMP12H
- Page 1 WM Range of Powered and Unpowered Stage Monitors Owners Manual And Instruction Guide...
- Page 2 Please take some time to read this manual and then keep it somewhere safe for future reference. Also, here at L2 audio, we welcome your feedback and information. We like to know what you’re using your L2 audio product for! Please take a few minutes to register your purchase online at www.l2audio.co.uk/warranty...
- Page 4 WMP/WM pair, you cannot link in another WM. If you have purchased WM series monitors, you are able to run up to 4 from a L2 audio PA series power amplifier (2 off each channel, linking through). If you have 2 WMP series monitors and 2 auxiliaries on your mixer, you can have 2 separate monitor mixes from your desk.
- Page 5 Input on the WMP12H is via either male XLR or ¼” jack. Output or link out is for connectivity to another powered monitor and should be linked with a quality screened ¼” jack signal lead. Gain. This regulates pre-amplification of the signal coming from the input "IN", ensuring perfect operation of the channel circuits.
- Page 6 Specifications WM Series Passive Stage Monitors WM10 WM12 Frequency response 72Hz-20KHz 55Hz-20KHz Sensitivity 1w/1mt 96dB 97dB Maximum SPL 116dB 119dB Power handling (RMS) 100 watts 150 watts Horn dispersion 90º x 45º 90º x 60º Crossover frequency 5KHz 3.5KHz Impedance 8 ohm 8 ohm Input connectors...
- Page 7 WARRANTY TERMS AND CONDITIONS L2 Audio is exclusively distributed by the MGD group limited (hereinafter referred to as ‘MGD’) MGD or any MGD authorised agent warrant that the products supplied are free from defective material or workmanship. This warranty is for a period of one year from date of purchase.
- Page 8 E&OE...
Need help?
Do you have a question about the WMP12H and is the answer not in the manual?
Questions and answers