Advertisement
STAINLESS STEEL JUG KETTLE MODEL: PCC500
Prior to First Use
Remove all packing materials from the inside and outside of the kettle.
BOIL FRESH WATER INSIDE THE KETTLE TWO TO THREE TIMES
AND DISCARD THE BOILED WATER BEFORE NORMAL USE
How to Use
Always use the appliance on a heat-resistant, flat surface.
Fill the kettle with the desired quantity of cold water between the Min. and
Max. level. You can either remove the lid to fill the kettle or fill through the
spout.
Place the lid back on to the kettle.
Plug the kettle into the wall socket and press the 'ON/OFF' switch to the
ON position. The power indicator light will then be illuminated.
When the water has boiled, the kettle will switch off automatically.
Cleaning
It is extremely important to remember that cleaning of the kettle can only
be performed when the plug has been removed from the supply.
Never immerse any part of the kettle especially the cable and base plate
into water.
Cleaning should be performed when the kettle has cooled down.
Always ensure the electrical connections of the kettle remain absolutely
dry.
Clean the kettle with a damp cloth. Do not use cleaning products, which
can cause health hazard or discoloration of the kettle.
Ensure the outside and the electrical connection parts of the kettle are
completely dry before using.
De- scaling
It is important to de-scale the kettle at regular intervals in order to maintain
its efficiency.
The frequency of de-scaling will depend upon the area in which you live
There are many de-scaling powders and tablets available in supermarkets
& hardware stores. Just follow the instructions on the packet.
Advertisement
