Table of Contents
Advertisement
5. Select the temperature
Turn the selector dial to the required temperature
setting.
6. Select the programme and start it
Turn the programme selector dial clockwise to
the required wash programme and press the
start/stop button
: the operating pilot light
comes on and the machine starts to operate.
7. At the end of the programme
The machine stops automatically.
If you have selected a gentle programme, drain
the water before opening the door.
It is normal to have to wait for about 2 minutes
before being able to open the door to allow the
safety lock to release.
Press the start/stop button again, the operating
pilot light goes out.
Remove the laundry.
Turn the drum by hand to make sure it is
completely empty, so as to avoid any forgotten
items being damaged in a subsequent wash (e.g.
shrinking) or their colour running into a load of
whites.
Release any buttons which have been pressed.
Turn the water tap off and unplug the machine.
Leave the door ajar to air the machine.
P0450
P0465
P0471
33
Advertisement
Table of Contents
