Page 1
User’s Manual iP30iP1US Docking System with FM PLL Radio and Radio Alarm Clock DIGITAL MEMORY MEMORY TUNER PLAYBACK PLAYBACK BLUE 3WAY CLOCK QUARTZ REMOTE SPEAKER DIGITAL CONTROL SYSTEM DISPLAY...
These warnings are in the interests of your safety, ensure that you understand them all before installing or using this appliance. Please read this user manual carefully and retain for future reference. Your safety is of paramount importance. If you are unsure about any of the meanings or these warnings contact Palsonic Customer Service 1300 657 888.
Contents Description of the appliance Using the appliance Digital Clock Function How to Set the Clock Alarm Function How to Set the Alarm Alarm Mode Setting Snooze Function Volume Control Sound Effect Tone Control Operating the Radio Radio Memory Media Memory Device Playback Programming Media Memory Devices Text Display (ID3) Repeat Playback Function...
Description Due to ongoing modifications to our products, your appliance may vary slightly from this user manual. 9 10 11 12 24 25 Standby / Off Volume down – iPod / iPhone / iPad Dock Accessory Input Socket USB Drive Socket Volume up + Component Video Sockets SD Memory Card Socket...
Description Remote Control Mem – / Folder – Menu Repeat On / Standby Mem + / Folder + Tune – / Composite Display Sleep / Snooze Play / Pause Tune + / Component Function Mute Back Battery Compartment Tone 13 14 Stop / Clock Set Enter Remove (gently pull out) the plastic ‘tab’...
Using the unit Digital Clock Function The unit has a built-in digital clock, which is displayed when the unit is in ‘Standby’ mode. The display will continuously show the current time. When the digital clock is not set the digital clock display will continuously flash to indicate that the correct time has not yet been set.
Using the unit Alarm Function This unit has a alarm function to enable you to program the unit to automatically switch on at preset times, it will automatically turn off after an hour. It is equipped with 4 alarm modes: iPod, iPhone, iPad, Radio, USB or SD. there are 6 modes not 4? Before setting the alarm, make sure to set the clock.
Using the unit Volume Control Press Function / Result The ‘Volume Up’ button To increase the volume of unit, release the button when you reach the desired volume n remote control or level. n the unit. The ‘Volume Down’ button To decrease the volume of unit, release the button when you reach the desired volume n remote control or level.
Using the unit Operating the Radio continued Press Function / Result To ‘Scan’ (manually adjust) the radio’s frequency ‘Up’ or ‘Down’ by 1-step at a time. The ‘Back’ or the ‘Next’ The radio’s LCD will indicate the exact frequency position. When a desired frequency button on the remote or station is reached.
Using the unit MP3 (MPEG 2, layer 3) is a digital file format for music. You can download MP3 songs from many websites on the internet, but please observe the copyright regulations of your country. MP3 songs are much smaller in memory size compared with normal audio formats.
Using the unit Programming for Media Memory Devices The CD player can be programmed to play any sequence of up to 20 tracks for audio CD and 99 tracks for MP3. Press Function / Result The ‘On / Standby’ button To switch on the unit.
Using the unit Operating the iPod, iPhone or iPad You can operate the iPod, iPhone or iPad using either the unit, remote control or directly with the iPod, iPhone or iPad. When the iPod, iPhone or iPad is connected to the unit, it will start charging the battery of the iPod, iPhone or iPad. Connect the iPod, iPhone or iPad with the dock connector, see page 12 –13, turn everything on and follow the instructions below.
Using the unit Repeat Playback Function on the iPod, iPhone or iPad Press Function / Result The ‘Repeat’ button Press repeatedly to select: n remote control or REPEAT to repeat the current track n the unit or REPEAT ALBUM to repeat the current folder iPod, iPhone or iPad REPEAT ALL to repeat all songs...
Using the unit iPod, iPhone or iPad Rear Support Stand This unit is designed to allow you to connect an iPod, iPhone or iPad without the need for dock connectors. The design of the unit has been structured to provide support to the connector under normal usage without excessive pressure on the iPod, iPhone or iPad when controlling playback using the iPod, iPhone or iPad screen.
Using the unit iPod, iPhone or iPad Dock Accessory This unit is designed to allow you to connect an iPod, iPhone or iPad without the need for dock connectors. The design of the unit has been structured to provide support to the connector under normal usage without excessive pressure on the iPod, iPhone or iPad when controlling playback using the iPod, iPhone or iPad screen.
Design and specifications are current as of July 2011 (V.1), but are subject to change without notice. Specifications for Australia & New Zealand Only. Palsonic Customer Service Telephone (Australia) 1300 657 888 Palsonic Corporation Pty Ltd ABN 34 000 474 108 1 Joynton Avenue, Waterloo NSW 2017 Australia Telephone (02) 9313 7111 Facsimile (02) 9697 0655 www.palsonic.com.au...