Turn Handset On & Off; Enable Security - Motorola i686 User Manual

charge from your
computer
You can partially charge your phone's battery
by connecting a Motorola-approved USB cable
from your phone's micro-USB port to a high
power USB connector on a computer (not a
low-power one, such as the USB connector
on your keyboard or bus-powered USB hub).
Typically, USB high-power connectors are
located directly on your computer.
turn handset on & off
To turn on your phone, press and hold @ for
a few seconds or until the display turns on. If
prompted, enter your four-digit unlock code.
Note: If you press the @ for more than four
seconds, the handset will power "On" in
Transmitters Off mode. See "transmitters" on
page 43.
To turn off your phone,
press and hold @ for two
seconds.

enable security

You must enable security the first time you
power on your phone or within 10 days of first
activation of your phone.
1 Press K under Ok.
2 You are prompted to enable security.
Press K under Yes. A series of screens
followed by the default home page
displays.
3 Press @ to return to the home screen.
essentials 13