TVStick Contents 1. TVStick connection details 2. Connecting the TVStick 3. Remote control 4. Software installation 5. Setting up the software User Manual TVStick...
TVStick TVStick connection details The TVStick has two connections. A USB connector to connect to a PC and an antenna connection for receiving TV signals. USB 2.0 Antenna input TVStick User Manual...
TVStick Connecting the TVStick Connect an antenna to the TVStick. The USB connector on the TVStick should be connected to a USB port on the computer. Note: An external antenna may be required to receive DVB-T signals. User Manual TVStick...
TVStick Remote Control MUTE: on/off sound SNAP SHOT: takes a snapshot of the current screen. Screen toggle: switches between full screen and the default screen. TotalMedia: open/close TotalMedia software. 0-9: channel number keys ESC: return Time-Shift: pause live TV Up/Down/Left/Right/OK CH+/CH-: channel up/ channel down.
TVStick Software Installation Connect the TVStick to a USB port on your computer. The following or similar will appear in the bottom right hand corner of your screen. Insert the provided software installation CD into your computer’s CD drive. The following main menu should appear: Note: If the installation doesn’t autorun,...
Page 8
TVStick Select your preferred language and select ‘Next’. A welcome screen will appear like you see below. Select ‘Next’ on the following Destination location screen, then select ‘Install’ to install the drivers. TVStick User Manual...
Page 9
TVStick When the driver installation has finished select ‘Finish’. Return to the main CD menu and select ‘Software Install’. The following screen should appear: Choose your preferred language then press ‘OK’. User Manual TVStick...
Page 10
TVStick The following screen should now appear; Click ‘Next’. The License agreement page will now appear. If you agree to the software terms and conditions and would like to keep installing, click on ‘Yes’. TVStick User Manual...
Page 11
TVStick A page will appear asking for a user name and license key. You can enter your own user name eg. “Your Name”. The license key can be found on the back of the CD sleeve. Follow the on-screen prompts and the software will then install. User Manual TVStick...
Page 12
TVStick When the software has finished installing, an icon will appear on the desktop for ‘TotalMedia 3.5’ Double click this icon to start the program. TVStick User Manual...
TVStick Setting up the software Select ‘Setup’ from the TotalMedia 3.5 main menu. Select ‘TV’ on the next menu. User Manual TVStick...
Page 14
TVStick ‘Australia’ will be selected as the current region. Click ‘Next’ to continue. Select ‘Use LCN’ (Local channel Number) and then click ‘Start’ to commence a channel scan. TVStick User Manual...
Page 15
TVStick The program will then scan for channels. This may take several minutes. Found channels will be displayed in the channel list. Click ‘Next’ to continue. Note: If no channels are found, connect an external antenna. Click ‘Finish’ to complete the channel scanning. You can now watch TV by going back to the main menu and selecting ‘TV’.
Page 18
24/7 Tech support www.kaiserbaas.com/support Double your Warranty for Free! www.kaiserbaas.com/join...
Need help?
Do you have a question about the TV Stick and is the answer not in the manual?
Questions and answers