Yamaha GP800R WaveRunner 2004 Owner's/Operator's Manual page 28

1 Engine shut-off cord (lanyard)
Attach to wrist so that the engine stops if the
operator falls off the watercraft.
2 Engine stop switch
Push to stop the engine normally.
3 Clip
Insert into the engine shut-off switch to enable
starting of the engine.
Remove to stop the engine or prevent acci-
dental starting of the engine or unauthorized
use of the watercraft.
4 Quick Shift Trim System (QSTS) selector
Use to select the trim angle of the watercraft.
5 Engine shut-off switch
Remove the clip to stop the engine and dis-
able it from starting.
6 Start switch
Push to start the engine.
7 Multifunction information center
Use to check watercraft operation.
8 Throttle lever
Use to accelerate and decelerate.
9 Choke lever
0 Oil tank filler cap
A Fuel cock knob
B Stern drain plugs
Use to drain water in the bilge when the water-
craft is on dry land.
C Jet thrust nozzle
Changes the direction of jet thrust according
to handlebar position.
D Ride plate
2-3
E