Yamaha GP1300R WaveRunner 2006 Owner's/Operator's Manual page 103

G
QSTS cables (pulley end)
G QSTS cables (handlebar end)
Remove the QSTS cable housing. Spray
a rust inhibitor into the outer cable.
Reinstall the QSTS cable housing.
G
Intermediate housing
Using a grease gun, fill the intermediate
housing with
through the grease nipple.
Grease quantity:
Initial 10 hours or 1 month:
33.0–35.0 cm
Every 100 hours or 12 months:
6.0–8.0 cm
4-17
water-resistant grease
3
(1.11–1.18 oz)
3
(0.20–0.27 oz)
E