Zanussi ZWU 6120 Instruction Booklet page 10

Delayed start
The selected delay (24 hours max) set by means of
the relevant button appears on the display 3
seconds, then the duration of the previously selected
programme is displayed.
The countdown is updated every hour.
Incorrect option selection
If an option which is not compatible with the set wash
programme is selected, the message Err is displayed
for 2 seconds and 3 acoustic signals ring.
Alarm codes
In the event of operating problems, some alarm
codes can be displayed and the buzzer sounds, for
example E20 (see paragraph "Something not
working").
End of programme
When the programme has finished a flashing zero is
displayed and the buzzer sounds.
11 START/PAUSE button
This button has three functions:
• Start: after you have selected the desired
programme and options, press this button to start
the machine. The light above the button will stop
flashing and remain lit.
If you have selected a delay start by means of
button 9, the countdown will begin and will be
shown on the display.
• Pause: when you press this button again, the
programme in progress is interrupted. The light
above the button will start flashing. To restart the
programme, press the button again.
• Draining of water: pressing this button the water
at the end of SOAK programme will be drain.
Important!
By depressing simultaneously START/PAUSE and
DRYING TIME buttons for about 3 seconds the
buzzer is switched off when selecting a programme,
depressing a button, at the end of a cycle or in case
of a wrong selection.
12 Programme phase indicator lights
When you select a programme, the lights relevant to
the phases that form the programme light up.
10