Advertisement
Assembly
Place Base Foot A onto the base of the Tower Fan and bring through the Power Cord and
slot it into the Cord Channel.
Slot Base Foot B on top of Base Foot A so that both sections are fixed together (see image
2).
Screw the Bolts into the holes to secure the Base Feet.
Instructions for use - Operation
Plug into 230V AC mains outlet and
select desired speed (1-3). Press 0 to
stop the fan.
Pressing the Oscillation Button
downwards, which is located above the
Speed Buttons, will cause the fan to
sweep back and forth. Releasing the
button will stop the oscillation.
Timer
Turn the Timer Switch clockwise to the
desired time (0-120 min). The fan will
automatically stop when the Timer
Switch reaches zero. When you do not
wish to use the timer set the switch at I.
Advertisement
